Will Rhino Rack Roof Basket # RMCB02 Fit Factory Crossbars of 2017 Toyota Highlander

Question

Question:

Rhino-Rack Roof Mounted Steel Cargo Basket - 57inch Long x 42inch Wide - 165 lbs Would this fit on my 2017 toyota Higlander? It come equipt cross bars.

asked by: JK L

0

Expert Reply:

Yes, the Rhino Rack Roof Basket part # RMCB02 that you referenced is a confirmed fit for the factory crossbars of your 2017 Toyota Highlander.

expert reply by: Jameson C

0

Answer 1

The Rhino-Rack Roof Mounted Steel Cargo Basket #RMCB02 is compatible with crossbar spreads of 25-1/2" - 43". This measurement is taken by measuring the middle of one crossbar to the middle of the other crossbar. Even though the…

view full answer...

Answer 2

Yes, the Stretchable Net and Tie-Down Straps for Rhino-Rack Roof Cargo Basket - 47-1/4" x 31-1/2" #RLN1-RTD4 will work with the Rhino-Rack Cargo Basket #RMCB02. The net has bungee cords that will be able to stretch to fit the…

view full answer...

Answer 3

For starters, you will need to install a hitch like the Draw-Tite #75726. You will also need a pin and clip, part #PC3 or a locking hitch pin like #e98882 to secure the cargo carrier in the receiver. These are the necessities, but there are other…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 5

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…

view full answer...

Answer 6

I wish I could say yes, but as of right now they are not a fit for the 2016 models and we do not have any other suspension enhancement options. If you are trying to fight suspension sag from the tongue weight of a trailer there is a better option.…

view full answer...

Answer 7

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 9

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A cover being installed on your spare tire would not prevent the Swagman Bike Rack part #S80501 from installing. The rack would still fit and work well. You might still compare the dimensions in the picture I attached with you spare tire so that…

view full answer...

Answer 12

We have one option that will work for you. The Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2 #8-407-5UC3-EZ uses inner bearing #L68149 and outer bearing #LM67048 so it would work perfectly on your…

view full answer...

Will Rhino Rack Roof Basket # RMCB02 Fit Factory Crossbars of 2017 Toyota Highlander

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching