Recommended Quad View Monitor With Side View Cameras And Rear Camera Options With Tow Connection

Question

Question:

WHAT CAMERAS 2 SIDE AND 2 BACKUP DO YOU SELL FOR THIS MONITOR. i LIKE THE SIZE OF THIS MONITOR. 2004 3/4 4X4 DODGE

asked by: Emil S

0

Expert Reply:

We installed the Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor # RVS-062710 on a coach a few months ago and it was really cool. This kit includes the 2 side cameras and the two back up cameras which all have the infrared function for night. This has all the cables needed as well.

You can customize a system if you want specific cameras with the # RVS-6137Q. I recommend getting the two side cameras # RVS-775R and # RVS-775L that will give you 9 infrared illuminators and 120-degree viewing angle. These cameras come with 33 feet of cable each. I also recommend gettiing the Rear View Safety Trailer Tow Quick Connect/Disconnect Kit - 3 Camera Set Up # RVS-2133 so you can have a camera on your truck and the two sides and rear on your trailer.

You may want a surface mount rear camera like # RVS-611-IR that will give you 170-degree viewing with up to 30 feet of night vision. There is also a heated option with night vision # RVS-812N with 120-degree view and 65 foot cable. The standard rear camera with night vision is # RVS-771. I know there are a lot of camera options and any will work with your system, but all of them are really good quality, so it is a preference choice for your custom application.

expert reply by: Jason S

0

Answer 1

There's actually a version of the Rearview Safety Backup Camera kit part #RVS-770614 that comes with a quick disconnect kit for trailer applications like what you mentioned. For that you'd want the part #RVS-770614-213 instead. I attached a…

view full answer...

Answer 2

You can pretty much mount the camera for the RVS System #RVS-83112 anywhere you have a flat surface on the truck or trailer, so I'm confident you can find a good spot that allows you to monitor the tires. The system creates its own WiFi signal so…

view full answer...

Answer 3

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 4

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 5

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 6

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Answer 7

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 8

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 9

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 12

It sounds like when the Redarc Tow-Pro Elite Brake Controller #RED44FR was installed on your 2022 Toyota Highlander that they may have damaged the brake signal wire or tied into the wrong wire. I recommend taking it either back to the shop who…

view full answer...

Recommended Quad View Monitor With Side View Cameras And Rear Camera Options With Tow Connection

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching