Does Trailer Hitch for 2010 Lexus RX 350 Allow Tow Hooks to Reinstall

Question

Question:

I am considering the curt hitch c13143 but I noticed on the installation video that the tow hooks were not reinstalled but in the instructions that are provided on etrailer by curt that the tow hooks can be reinstalled. Is it ok to reinstall the tow hooks?

asked by: Alan B

0

Expert Reply:

As long as your 2010 Lexus RX 350 isn't an F Sport model the tow hooks of your Curt Hitch part # C13143 can be reinstalled afterwards.

I attached an install video for you to check out as well.

expert reply by: Jameson C

0

Answer 1

A tow package for a vehicle is usually a frame mounted trailer hitch and trailer wiring on a vehicle like your 2002 Dodge Dakota. If you have those two things you could pretty easily assume you have the tow package. Or, you can take the VIN of your…

view full answer...

Answer 2

There is a possibility of 2 different problems. The first is that if you have the front wheel drive model RX350 and the factory tow package, then the Curt Custom Fit Vehicle Wiring, part #56083 is not compatible with your 2010 Lexus RX350. The…

view full answer...

Answer 3

The Curt Hitch #C13143 that you referenced will fit your 2013 Lexus RX350.The picture shows what the hitch will look like on the back of your vehicle - the receiver opening is about flush with the bumper. In the installation instructions that are…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 6

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 9

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 10

We have a really great kit that comes with everything you'd need to convert your 2021 Vanleigh Pinecrest 335RLP from tandem 6k drum brakes to electric over hydraulic disc brakes with the HydraStar Disc Brake Kit w/ Actuator for Triple Axle…

view full answer...

Answer 11

We definitely have some trailer jacks you can use as a replacement for your Dutton-Lainson but it doesn't look like anything we have will work as a direct replacement. If you'd like to stick with the Dutton-Lainson brand then I recommend…

view full answer...

Answer 12

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Does Trailer Hitch for 2010 Lexus RX 350 Allow Tow Hooks to Reinstall

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching