Is Adapter Available To Mount Fulton Jack With 3x4 Bolt Pattern To Trailer Plate With 5x4 Pattern
Question:
I purchased a Fulton f2 jack for my ranger trial trailer. I took off the old jack and went to put the new one on and the bolt pattern is not the same. My trailer has a 5x4 inch bolt pattern and the jack is a 4x3. Is there a adaptor plate that will work for my trailer that I dont have to weld on?
asked by: Robert G
Expert Reply:
I wish we had an adapter that woudl let you use the Fulton F2 Swing-Up Trailer Jack, PART # F1413100334 with the 5 x 4 mounting plate on your trailer but we do not have any available.
You will need to either have the plate you have cut off and replaced with the Mounting Bracket and Hardware, part # F500277 or possibly mount the mounting plate in a different place on your trailer, maybe on the other side. I wish I had a better option but we do not carry adapters for mounting the jack.
Product Page this Question was Asked From
Weld-On Mounting Bracket and Hardware for Fulton Swing-Up Trailer Jacks with 3" x 4" Mount
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Mounting Hardware
- Brackets
- Fulton
more information >
Continue Researching
- Video: Fulton XLT 2-Speed Trailer Winch with Heavy Duty Strap Review
- Shop: Fulton XLT 2-Speed Trailer Winch - 10" Long Handle - 20' Strap - Zinc - 3,200 lbs
- Video: Review of Fulton Weld-On Adapter Kit - F500320
- Shop: Trailer Hitch
- Shop: Ark Xtreme Off-Road Swivel Trailer Jack w/ 2 Wheels - Sidewind - 18" Lift - Black - 1,650 lbs
- Video: Fulton Trailer Winch - Standard Hand Winch - F142425 Review
- Shop: Steel Directional Trailer Wheel - 13" x 4-1/2" Rim - 5 on 4-1/2 - Chrome Finish
- Shop: B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5.5" Rise - 10K - Browning
- Shop: Weld-On Mounting Bracket and Hardware for Fulton Swing-Up Trailer Jacks with 4" x 5" Mount
- Shop: Weld-On Mounting Bracket and Hardware for Fulton Swing-Up Trailer Jacks with 3" x 4" Mount
- Video: B and W Tow and Stow Ball Mounts Adjustment Pin and Clip Replacement Review
- Q&A: Replacement Jack For 2001 Stratos Bass Boat Trailer
- Q&A: Recommended Mounting Bracket For Fulton F2 Jack
- Q&A: Weld-On Mounting Bracket and Hardware Dimensions for Fulton Swing-Up Trailer Jacks
- Q&A: Bracket for Mounting Fulton Trailer Jack
- Shop: Dutton-Lainson Covered Hand Winch - 2 Speed - Freewheel - 25' Strap - 2,600 lbs
- Video: Review of Fulton 4 x 5 Trailer Frame Mounting Bracket - F500276
- Video: B&W Tow & Stow 2 Ball Mount Review
- Video: B and W Ball Mounts - Adjustable Ball Mount - BWTS10037BB Review
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Tool for Adjusting Drum Brakes on Drop Axle
- Article: Determining Trailer Tongue Weight
- Article: Pintle-Hitches
- Q&A: Solution for Atwood Surge Brake Coupler Needing Replacement Parts
- Article: Trailer Tire Sizing
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide
- Article: Brake Controller Installation: Starting from Scratch