Idler Hub for 13-Inch Trailer Wheel That Uses L44649 Bearings
Question:
Can I put an 13 inch rim on this hub
asked by: Russell
Expert Reply:
The Trailer Idler Hub Assembly # AKIHUB-545-2-2K you referenced is compatible with wheel diameters from 8-inches up to 12-inches. It is not usable with your 13s.
For a similar idler hub that uses the same bearings (meaning it will fit on the same spindle as the other part) you can use one of the hubs shown on the linked page. All items shown use the same L44649 bearings, work with 13-inch wheels and have the same 5-on-4-1/2-inch wheel bolt pattern as the part you referenced. All of these hubs are rated for used with either 2000- or 2200-lb-rated axles.
The nearest item to the one you reviewed is idler hub part # AKIHUB-545-2-LF-2K.
Products Referenced in This Question
Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Search Results: gnrk1500
- Shop: Gooseneck Hitch
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000 lbs
- Shop: Brake Controller
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-3/4 - Pre-Greased
- Article: Printable Trailer Bolt Hole Pattern Template
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Search Results: 41945
- Q&A: Hitch and Spare Tire Carrier Recommendation for a 2014 Ford E-350 Cutaway Motorhome
- Q&A: Availability of Rear Hitch for 2014 Ford E350 Van
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Q&A: Ball Stuck in my Factory Gooseneck on my 2016 Ford F-250
- Shop: Buyer's Products Bolt-On 2-1/2" Hitch Receiver Tube - 20K
- Search Results: 1/2 stud
- Search Results: gh~8055
- Search Results: 3015~p
- Shop: Suspension Enhancement
- Shop: Floor Mats
- Shop: Vehicle Air Mattress
- Shop: Side Window Vents
- Search Results: rvk3050
- Search Results: flatbed 5th wheel hitch
- Q&A: Trailer Idler Hubs With L44649 Inner and Outer Bearings And 1-1/4 Grease Seal
- Q&A: Length of Hub For 2k Axles
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Hub - AKIHUB-545-2-LF-2K