Trailer Hitch and Wiring for a 2007 Saturn Vue
Question:
Hi, i was looking for a hitch for my vue and happened upon this type. It looks much easier to install, not to mention being half the price. Couldnt I mount this on my bumper bar, just like an rv bumper? I know I would need to alter the bumper cover, but aside from that, would this work as i described?
asked by: David
Expert Reply:
Actually, if you were to try to install Curt hitch # C19101 it would require a lot more work than the custom fit hitches for your 2007 Saturn Vue. You would have to access the metal bumper beam which would require removal of the rear fascia. Then once you get that removed it is possible, even likely, that the hitch will not fit.
Installation of a custom hitch such as # 13591 is much easier as you can see in the video I have linked showing an example installation. I have also included a link to the installation instructions. You pretty much get the hitch in position and bolt it on.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
And for trailer wiring you can use # 118418 to add a 4-Way flat connector to the rear of the vehicle. I have included a link to a video showing an example install of the wiring.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
- RV and Camper Hitch
- Bumper Mount Hitch
- 4 x 2 Inch Bumper
- 350 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Bolt-On
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Parts Needed to Flat Tow 2015 Chevy Malibu LS
- Q&A: Blue Ox Parts Needed to Flat Tow 2022 Jeep Gladiator Rubicon
- Q&A: Hitch Recommendations For A 2021 Keystone Sprinter 3530DEN 5th Wheel Trailer
- Q&A: Does The Progressive Dynamics PD4655V Have A Lithium Jumper
- Article: Trailer Wiring Diagrams
- Q&A: Will A Trailer Hitch Interfere With The Hands-Free Lift Gate On A 2017 Toyota Rav4 Platinum
- Q&A: Length, Width, and Height of Malone MicroSport Trailer Using Retractable Tongue Kit
- Q&A: Will 8 Lug Spare Tire Fit on Curt Trailer Hitch Mounted Spare Tire Carrier
- Article: Sidewinder with Rotating Turret for Short Bed Pickups
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Carry Bikes While Towing a Travel Trailer
- Article: How to Measure a Trailer Axle