Can I Use # 66010 Trunnion Bars in My # RP66131 Weight Distribution System to Increase Weight Cap.
Question:
Is it possible to upgrade the Reese RP66131 weight distributing hitch from 1500 to 1700 lbs tongue weight using the 66010 trunnion bars?
asked by: Wayne S
Expert Reply:
I spoke with my contact at Reese and he informed me that yes, you can swap the Reese Replacement Trunnion Spring Bar, 1,700 lbs, part # 66010 into your Reese Weight Distribution w/out Shank - Trunnion Bar - 15,000 lbs GTW, 1,500 lbs TW, part # RP66131, to increase the capacity of your weight distribution system to 1,700 lbs.
The head of your weight distribution system is capable of the 1,700 lbs, however you will need to make sure the the shank you are using is capable of 1,700 lbs tongue weight. If you need a stronger shank I would recommend the Convert-A-Ball Cushioned Weight Distribution Shank for 2 inch Hitches - 10,000 lbs, part # AMAC1. This shank can handle tongue weights of up to 2,000 lbs.
You should also consult your vehicle manufacturer for weight capacity specifications for weight distribution to be sure you are not over capacity.
When determining the overall weight capacity of your towing setup you should always go with the lowest weight capacity of all the components in your setup to determine what your actual weight capacity is.
Products Referenced in This Question
Convert-A-Ball Cushioned Weight Distribution Shank for 2" Hitches - 10,000 lbs
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 3 Inch Drop
- Trunnion - 2 Inch Drop
- Round - 6 Inch Rise
- Trunnion - 7 Inch Rise
- Convert-A-Ball
more information >
Reese Weight Distribution - No Shank - Trunnion Bar - 15,000 lbs GTW, 1,500 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- Reese
more information >
Product Page this Question was Asked From
Reese Replacement Trunnion Spring Bar, 1,700 lbs
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 1700 lbs TW
- Trunnion Bar
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller Installation: Starting from Scratch
- Article: Determining Trailer Tongue Weight
- Q&A: Wiring Diagrams for Hydrastar Electric Over Hydraulic Trailer Brake Actuators
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Fuse Bypass for Flat Towing 2009 Honda CR-V Equipped with Hopkins Harness HM56300
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Replacement Hitch Head for Reese Straight-Line 17K Weight Distribution System
- Q&A: Replacement Trailer Grease Seal for an NOK AD2527E Seal on a Boat Mate Trailer
- Q&A: Upgrading Weight Capacity of Trunnion Spring Bars for Travel Trailer with 1200 Pound Tongue Weight
- Article: Trailer Hitch Receiver Sizes
- Q&A: Weight Distribution Recommendation with Sway Control for 2019 Honda Pilot
- Article: Best Hitches for Travel Trailers (2022) - For a Smooth, Sway-Free Ride
- Article: Rust Prevention
- Q&A: Distance Between Hitch Pin Hole and Mounting Holes on Gen-Y WD Shank # 325-GH-1102