Replacement Master Cylinder Kit for Titan Model 60 Drum Brake Surge Coupler

Question

Question:

Can I buy just the master cylinder for this unit?

asked by: Chris M

0

Expert Reply:

For the Titan model 60 drum brake surge coupler the replacement master cylinder kit is part # T4395100. This includes the master cylinder, gasket, orifice connector, hardware and cover. I linked both review and installation videos to help you.

expert reply by: Adam R

0

Answer 1

Hi Bob, The Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies - 3,500 lbs #AKUBRK-35 are not free-backing. So you would need to install a solenoid like the Demco #DM11993.

view full answer...

Answer 2

If you have hydraulic brake assemblies that are not free-backing hydraulic trailer brakes, then the 10" X 2-1/4" Hydraulic Brake Shoe/Lining (One Wheel), #BP04-120, are the shoes that you will need. One set of shoes will replace one brake…

view full answer...

Answer 3

We have several sets of replacement hydraulic brake shoes available (see link to the right). Without knowing what size and brand of brake shoes you currently have though it would be impossible for me to recommend a set that would be confirmed to fit.…

view full answer...

Answer 4

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 5

The Replacement Master Cylinder Assembly #T4395100 has been very reliable and has received great reviews from the customers who've purchased it. It's the exact same master cylinder that is originally included with the Titan Model 60 and Aero…

view full answer...

Answer 6

The replacement I recommend for an Atwood Surge Brake Actuator 85778 is the Demco Hydraulic Brake Actuator part #DM62VR. It has the same ball size, offers a bolt-on install, and has a greater capacity. The only difference is it has an electric…

view full answer...

Answer 7

The Titan Replacement Master Cylinder Assembly #T4395100 is a direct replacement for Model 60 and Aero 7500 drum brake actuators. I measured this item and put the dimensions on the included photo. Overall assembled height including the filler cap is…

view full answer...

Answer 8

The distance from the front hole to the beginning of the slotted mounting hole on the bottom of the Jif winch part #315-W1800D is 3.5 inches and then the distance to the rear of the slotted hole is 5 inches so you'd be able to line up two of your…

view full answer...

Answer 9

The product ID for the DL1402A is the Dutton-Lainson Hand Winch with TUFFPLATE is #DL15303.

view full answer...

Answer 10

The Dutton-Lainson Hand Winch part #DL15303 is the replacement that I recommend for your Shelby Hand Winch 5405. These winches both have the same 1,400 lb capacity and overall size. In regards to mounting, most hand winches now use a standard pattern…

view full answer...

Answer 11

Our lightweight winches will range between approximately 7 and 8 lbs. I recommend taking a look at the Dutton-Lainson 1,400 lb winch, #DL15303. The Dutton-Lainson winch is the heavier winch between the two at approximately 8 lbs and comes with…

view full answer...

Answer 12

You can add a Manual Reverse Lockout Kit #DM5939 or Electric Reverse Lockout Solenoid Kit #DM5837 to the Demco Hydraulic Brake Actuator #DM8509612 to get the DA91 surge coupler with a reverse lockout.

view full answer...

Replacement Master Cylinder Kit for Titan Model 60 Drum Brake Surge Coupler

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching