Hub and Drum Recommendation for Dexter 3,500 lb Trailer Axle with Brake Assemblies
Question:
I own a 7x12foot trailer. It has a 3,500# single axle. It is a Dexter Axle with the following # on it is 2-132. It has a 4 bolt plate for backer plate to bolt to also. I am looking for both RH and LH complete brake/drum assemblies. Please advise what parts I should purchase. Thanks,
asked by: Joe
Expert Reply:
We have just what you need. But I would need to know your lug bolt pattern to pick out the correct hubs. If you check out the attached link you will see all of the hubs we offer that would fit your axle that are also drums. Most likely you have a 5 on 4-1/2 inch bolt pattern and the part # AKHD-545-35-EZ-K would be the correct hub.
Then for brake assemblies you would want the part # AKEBRK-35R-SA for the right hand side and part # AKEBRK-35L-SA for the left hand side.
Products Referenced in This Question
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: dexter 2 132
- Article: Most Popular Wheel Bearings
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Review of Dexter Trailer Leaf Spring Suspension - Suspension Kits - K71-403-00
- Shop: Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2
- Search Results: e97sr
- Search Results: ce23002
- Shop: Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 6 - Agricultural
- Shop: Dexter Trailer Idler Hub Assembly for 5,200-lb Axles - 6 on 5-1/2
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Shop: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs
- Q&A: How To Tell If I Have An EZ Lube Axle
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 84545BX Review
- Video: etrailer Trailer Idler Hub Assembly Installation
- Video: Review of etrailer Trailer Leaf Spring Suspension - 4 Leaf Double Eye Spring 4000 lbs Axle - e22YR
- Video: etrailer Trailer Axle 4-Leaf Double-Eye Spring Installation
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Search Results: b 370014 bg
- Search Results: black lug nuts
- Search Results: k71~358~00
- Search Results: ce11051
- Q&A: How to Identify Correct Replacement Bearings for Dexter Hub on Recreational Vehicle
- Q&A: Is the CE Smith U-Bolt Kit 23002 2-3/8 Inches Wide or 2-7/16 Inches Wide
- Q&A: Torque Spec for Tightening Nuts of 1/2 inch Diameter Trailer Suspension U-Bolts
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Q&A: Replacement Oil Cap for Oil Bath Trailer Hub w/ 3-3/4 Inch Outside Diameter
- Shop: Transmission Cooler
- Q&A: Adjustable Ball Mount With 1-7/8", 2", 2-5/16" and Pintle Lock Capabilities