Fitment of a Yakima FullBack 2 Bike Rack on a 2016 Toyota Prius

Question

Question:

does the Yakima #Y02634 bike rack work with a 2016 Prius? I purchased a thule didnt work had to return it

asked by: DENNIS L

0

Expert Reply:

Yakima has confirmed that their FullBack 2 Bike Rack, # Y02634, will fit for your 2016 Toyota Prius. I've attached a video that reviews this rack. You will see the rack in the video is on a Toyota Prius.

I've attached a couple pictures of this rack on a Prius so you can see the fit on a similar model to yours.

You may also consider a Yakima Tube Top Bike Adapter Bar, # Y02531, for any Women's, Children's, or Alternative frame bikes. It fits most bike frames and styles and creates a straight top tube to make the bike compatible with the carrier.

expert reply by: Jason S

0

click to enlarge

Therese K.

2/18/2020

Hi, you referred to a video in the text, I cant find it here.I have a Toyota Prius 2016 and need this product.Regards,

Reply

Chris R.

2/19/2020

I have copied a link that will take you right to the video review for the Yakima FullBack. Just let us know if you need anything else!

Helpful Links

tv-review-yakima-fullback-2-bike-rack-y02634.aspx

Reply

Answer 1

Any type of hitch adapter or extender will have the unavoidable side-effect of causing a loss of about half of your hitch's rated capacity, both its tongue weight (TW) and it's gross towing weight (GTW). Hidden Hitch extender #HE18…

view full answer...

Answer 2

My favorite bike rack, and the rack I recommend for your Trek 7.3FX bike is the Hollywood Racks Trail Rider Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount #HR200Z. I really like this rack because it offers adjustable…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…

view full answer...

Answer 9

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Fitment of a Yakima FullBack 2 Bike Rack on a 2016 Toyota Prius

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching