Does the Equal-i-zer Weight Distribution System # EQ37101ET Include the L-Pin w/Clips EQ95-01-9430?

Question

Question:

Hi, I am looking at getting the equalizer EQ37101ET hitch system as I need to get a different shank for additional drop. In some of the pictures, the L pins had the old style keys and in other pictures it showed the newer style L pin with clips EQ95-01-9430. I was wondering if you knew which this came with.

asked by: Mike

0

Expert Reply:

I was able to go out to the warehouse and check the # EQ37101ET weight distributions for you and I found that they all have the new snap pin like the image of the # EQ95-01-9430 you referenced.

The shank that offers a larger drop for the Equal-i-zer system that is compatible with a 2 inch trailer hitch is the # EQ90-02-4400. I have linked it to this page for you to check out. It has a gross trailer weight of 14,000lbs, a tongue weight of 600lbs to 1,400lbs, and an overall length of 12 inches.

The maximum rise will be 13 inches from the top of hitch receiver opening and a maximum drop of 9 inches from the top of hitch receiver opening with incremental adjustments every 1-1/4 inch.

It's important to note that you will need a thin walled 1-7/8 inch socket to attach the included ball. If you do not have one we offer the # ALL643216.

I have attached all the above mentioned products to this page for your viewing and purchasing convenience.

expert reply by: Jackie C

0

Answer 1

Yes, the Sway Bracket Jackets for Equal-i-zer Weight Distribution Systems #EQ95-01-5150 you have will work great with the Replacement L-Pins and Clips for Equal-i-zer Weight Distribution Systems #EQ95-01-9430. Attached are a couple of videos for you…

view full answer...

Answer 2

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 4

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 8

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 9

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 12

For all intents and purposes, yes, the Fulton drop leg stabilizer jack SJL80300 is the same as the square leg jack you asked about: - Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs #SJ-R208 Different manufacturers but otherwise they…

view full answer...

Does the Equal-i-zer Weight Distribution System # EQ37101ET Include the L-Pin w/Clips EQ95-01-9430?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching