Center Cap Hub Cover for 15 Inch Trailer Wheel with 6 Bolt Pattern

Question

Question:

I have a 2006 Travelstar 18SD with 15inch wheels, but a 6 bolt pattern. Would I buy model AM90092B or AM90091B? What are the measurements for AM90092B? Thanks

asked by: Kevin

0

Expert Reply:

The Americana Trailer Wheel Center Caps that you referenced are designed to fit either 15 inch or 16 HWT trailer wheels. If you have a 15 Inch HWT wheel, such as # AM20455B, the center cap you will want is # AM90091B.

If you do not have an HWT 15 inch trailer wheel, this cap will not notch into place correctly. We do offer other hub covers that will protect your wheel's lug nuts, such as the Phoenix USA QuickTrim Hub Cover, Black # QT655B or in Chrome # QT655C. This hub cover is designed for wheels with a 6 on 5-1/2 inch wheel bolt pattern.

I have attached a linked page for you to all of our wheel trim accessories.

expert reply by: Victoria B

0

Answer 1

The correct replacement wheel for your 2007 Jayco Baja Series M-10 Y is the Dexstar Steel Mini Mod Trailer Wheel part #AM20560. The wheel capacity has since been derated to 2,600 lbs. This is exactly what you need for your trailer.

view full answer...

Answer 2

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 5

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 6

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 9

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 10

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Center Cap Hub Cover for 15 Inch Trailer Wheel with 6 Bolt Pattern

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching