Trailer Hitch Recommendation for 2016 Mercedes GLA 250 For Towing Jet Ski Trailer
Question:
Which trailer hitch, wiring etc... is required to tow two jet skis Also, does the vehicle require any modifications to the bumper or tail pipes? Can the my Mercedes dealer install or do I have to go to a custom trailer hitch location?
asked by: Jeffrey S
Expert Reply:
We have just what you would need to tow a jet ski trailer with your 2016 Mercedes GLA 250. For a hitch you would want the Draw Tite part # 75223 which is a confirmed fit with more than enough capacity.
The exhaust would need to be temporarily lowered to install this hitch (this is a very common install step for hitches), but there would be no permanent modification. The heat shield would also need to be slightly modified as well. A local garage with a good reputation would have no problem installing this. Or you could take it to a Mercedes dealer.
For trailer wiring you would want the ZCI harness part # 119250KIT that would require no splicing into the vehicle wiring.
Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
Products Referenced in This Question
ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Keys and Lock Cores For a Rhino-Rack Zenith Rooftop Cargo Box
- Article: Replacement Automotive Lighting
- Q&A: Replacement Trailer Wheel for Dexstar Wheel 17-293
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?
- Q&A: Wiring Instructions For The Furrion Automatic Transfer Switch
- Q&A: Recommended Trailer Hitch for 2021 Mercedes-Benz GLA250
- Q&A: Trailer Hitch and Bike Rack Recommendations for a 2020 Mercedes-Benz GLA
- Article: Trailer Tire Sizing
- Q&A: Trailer Hitch that Fits 2021 Mercedes GLA 35 AMG
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Rent an RV
- Article: Best Bike Racks for Electric Bikes
- Article: Which Hitches are Made in the USA
- Article: Trailer Wiring Diagrams