How to Select Replacement Trailer Hub Using Bearing Dimensions
Question:
which 5 bolt replacement hub l44649 Outer and inner LM11749 tapered spindle 5x4 bolt pattern. Would like to move to 5 x 4.5 13 inch wheel/tire
asked by: Jake
Expert Reply:
We do not offer any hubs that use the bearing set LM11749 and L44649 but we may still be able to help you find replacement hubs that will fit your spindles and have the 5-on-4-1/2 bolt pattern you want. You'll need to measure the spindles at the points noted in the linked diagram. These points, B, C and D, are where the grease seal, inner bearing and outer bearing, respectively, sit on the spindles. You'll need to measure to the nearest thousandth (e.g. 1.234-inches) using a precision caliper like # PTW80157.
With those dimensions you can check through the link on bearings to find the ones that match your dimensions. Then you can search our hub parts for hubs that use bearings with those same dimensions.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Tire Sizing
- Video: CE Smith Trailer Hubs and Drums - Hub - CE13109 Review
- Video: Choosing the Best Trailer Bearing Races Caps and Seals
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 4 on 4 - Pre-Greased
- Article: How to Measure a Trailer Axle
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Article: How to Determine Tire/Wheel Diameter
- Search Results: al ko axle hubs
- Search Results: al ko axles
- Search Results: spindle grease seal
- Search Results: spindle
- Search Results: al ko axle
- Shop: 7-Piece Installation Set for Bearings, Races, and Seals
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Q&A: Bearing Kit for Use with ALKO S19 Axle
- Q&A: How to Measure a Trailer Spindle
- Q&A: How to Determine The Correct Replacement Trailer Hubs by Bearing Numbers or Spindle Size
- Q&A: Does Race Need To Be Replaced If Installing New Bearings
- Q&A: How to Determine Hub and Spindle Size
- Q&A: Trailer Hub Replacement Solution for AL-KO Trailer Axle 362635 A7
- Q&A: What Does BTR and BT8 Mean when Picking Out Replacement Trailer Hub
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 68149