Recommended Fastway Solid-Tow Ball Mount for 2016 Chevrolet Silverado 2500HD w/2-1/2 Inch Receiver
Question:
Looking at the Fastway solid tow!not sure how much drop I need? 2016 Chevy Silverado 2500HD. 22inch from ground to top of 2-1/2inch receiver! Thanks No trailer yet! Wanted the hitch in case. They say average trailer height is 16". Not sure if I should get 4 or 6 inch drop?
asked by: Ron
Expert Reply:
I have a solution for your 2-1/2 inch receiver on your 2016 Chevrolet Silverado 2500HD.
Since you don't already have the trailer then the Fastway Solid-Tow Adjustable Ball Mount # DTSTBM6625 would be a great choice. This comes with 2 sized balls, 2 inch and 2-5/16 inch, and a weight capacity of up to 10,000lbs. This ball mount has an adjustable drop up to 6 inches and 1 inch increments so you could also have your 4 inch drop.
Typically, if the trailer is going to be on the heavier side with more weight loaded at the front of the trailer, I would recommend the 4 inch drop because with the added weight you are likely to end up level with the 4 inch drop.
While if the trailer is just going to be a lighter transporter you will want to get a 6 inch drop because it won't put as much pressure and weigh down the rear axle like a heavy trailer will.
I have linked the recommended Fastway ball mounts to this page for your purchasing convenience.
Continue Researching
- Q&A: Can Wheel Nets or Wheel Straps be Used With Wheel Chocks on E-Track
- Q&A: Recommended Ball Mount with Best Ground Clearance and 10 Inch Drop
- Q&A: Adjustable Ball Mount Recommendation for 2.5 inch Hitch that Doesnt Carry Lower Ball Below Platform
- Q&A: Can Wheel of Vehicle Rest on E-Track When Using Wheel Chocks
- Video: Fastway Ball Mounts - Adjustable Ball Mount - FA42-00-2925 Review
- Video: Erickson E-Track Tie-Down Kit with Ratchet Straps, Wheel Chocks, and Roller Idlers Review
- Video: etrailer E-Track Backing Plate with Hardware Review and Installation
- Video: Curt Adjustable 2-Ball Channel Mount Review
- Article: How to Measure for Trailer Hitch Drop
- Shop: Replacement Ball Platform for Curt Rebellion XD Adjustable Ball Mount
- Shop: Flash Simple Heavy Duty 2-Ball Mount - 2-1/2" Hitch - 10" Drop, 10" Rise - 18K
- Shop: Shocker Hitch XRC Cushioned Ball Mount - 2-5/16" Ball - 7-1/2" Drop - 20K
- Shop: Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Shop: Erickson E-Chock Wheel Chocks for E Track - Powder Coated Steel - Qty 2
- Shop: etrailer E-Track Backing Plates w Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 16
- Shop: Fastway Trailer Hitch Lock and Adjustment Pin Lock Set for Flash E Series HD Ball Mounts
- Video: Choosing the Right Trailer Wiring
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Shop: Trailer Hitch
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 25580
- Shop: Trailer Wiring
- Q&A: Adding Brakes to a Mobile Home Axle
- Video: Titan Trailer Brakes T2385200 Review
- Search Results: 68149
- Shop: Fifth Wheel Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Brake Controller
on Trailer Hitch Ball Mount
