Availability of Trailer Hitch for Keyston Fuzion 390 to Tow 4-Wheeler Trailer

Question:

I am looking for a hitch to install on my keystone fusion 390. I will be towing a 4 wheeler trailer. Could you let me know if you have ant think that could be used.

asked by: Kevin S

Helpful Expert Reply:

We have a number of different hitch options that may work for your Keystone Fuzion 390. Trailer hitches made for RV's are not vehicle specific so you may need to take a couple of measurements to be sure a hitch will work well on your trailer.

One of the most universal fit trailer hitches for an RV is the Curt Adjustable Width Trailer Hitch Receiver # 13703. This hitch is adjustable to fit RV frame widths from 22 inches to 72 inches wide. Installing the hitch can either be a weld-on or bolt-on installation, and the hitch is designed to fit box frame, C-channel, or I-beam frames. This hitch design will place the top of the hitch receiver 3 inches below the trailer's frame once installed. Curt has tested this hitch and given it a Class III rating, with a 3,500 pound gross trailer weight capacity and a 350 pound tongue weight capacity.

You can check with Keystone to see what sort of towing capacity your trailer may be rated for to tow the 4-wheeler trailer.

All of our RV trailer hitches can be found at the attached link. If you can let me know the outside to outside frame width of your trailer, I will be happy to make a more specific recommendation for you.

expert reply by: Victoria B