Dimension of Mounting Hole on Redline Trailer Fender # PF11X35W
Question:
how far apart are the openings for the mounting brackets on PF11x35w......I know it doesnt give that information, but dont you have one you could measure????? think I need it to be 5.639
asked by: Ann S
Expert Reply:
I was able to go out to the warehouse and measure the mounting brackets holes for the PF11X35W and found that it was 5-5/16 inches or 5.3125 inches.
If these aren't an exact match, new holes can usually be drilled into the brackets to make them compatible. The recommended bracket for this fender is the # PF1135-BKT, this bracket works well for mounting fenders to a boat or other open sided trailer. The brackets use u-bolts to attach to the trailer frame and then the fenders mount to the brackets as shown in the attached image. The brackets are sold in a quantity of 1 # PF1135-BKT or a quantity of 2 # PF1135-BKT-2. For each fender you will need a set of 2 to mount properly.
I have linked all the above mentioned products to this page for your purchasing convenience.
Products Referenced in This Question
Galvanized Steel, U-Shaped, Bolt-On Bracket for Plastic, Single-Axle Trailer Fender PF11X35W
- Accessories and Parts
- Trailer Fenders
- Mounting Hardware
- 2-3/4 Inch Wide
- Brackets
- 13-1/4 Inch Long
- Redline
more information >
Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF11X35W (Pair)
- Accessories and Parts
- Trailer Fenders
- Mounting Hardware
- 2-3/4 Inch Wide
- Brackets
- 13-1/4 Inch Long
- Redline
more information >
Product Page this Question was Asked From
Plastic, Single-Axle Trailer Fender w/ Top and Side Steps - White - 13" to 15"
- Trailer Fenders
- Top and Side Step
- 13 Inch Wheels
- 14 Inch Wheels
- 15 Inch Wheels
- 11 Inch Wide
- Plastic
- Bolt-On
- For Single-Axle Trailers
- White
- Redline
more information >
Continue Researching
- Shop: Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF11X35W (Pair)
- Shop: Fulton Single Axle Trailer Fender with Top and Side Steps - Silver Plastic - 13" Wheels - Qty 1
- Q&A: Brackets to Mount CE Smith Trailer Fenders
- Q&A: Hardware for Redline Bolt-On Trailer Fender Brackets
- Shop: CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Black Plastic - 13" Wheels - Qty 2
- Q&A: Availability Of White Replacement Fender For 2003 Shoreland'r Trailer W/ ST205/75R15 Tires
- Shop: Comfort Ride Transom Saver - 27" to 36" Long - Aluminum and Stainless Steel
- Shop: Smooth Ride Transom Saver - 31" to 40" Long - Aluminum and Stainless Steel
- Video: CE Smith Trailer Fenders CE26098G-2 Review
- Q&A: Why Would An Additional Wire Cable Be Attached To a Transom Saver?
- Shop: Fulton Single Axle Trailer Fenders with Top and Side Steps - Black Plastic - 15" Wheels - Qty 2
- Search Results: al45pwtb
- Search Results: 12v plug
- Video: Optronics Trailer Lights - Tail Lights - STL13RMB Review
- Q&A: Looking for Replacement Fenders for 1999 Spartan Boat Trailer
- Shop: Mounting Brackets for Trailer Fender - 13"/14"/15" Wheels - Galvanized Steel - Qty 2
- Video: CE Smith Trailer Fenders - Top and Side Step - CE19503-2 Review
- Video: Trailer Valet RVR5 Remote-Controlled Trailer Dolly Review
- Video: Jif Marine Comfort Ride Transom Saver Review
- Q&A: Boat Fender Replacement Recommendation for Black Fender and 13" Wheels
- Search Results: bunk board
- Search Results: pf1135~bkt~2
- Search Results: fulton fender bracket
- Search Results: f008585~2
- Video: Review of CE Smith Boat Trailer Parts - Galvanized Steel Step Trailer Fender - CE26212G
- Video: Review of CE Smith Trailer Fenders - Single Axle Trailer Fender Diamond Tread Aluminum - CE17960ATB
- Q&A: Fulton Plastic Fender F008593 Mounting Brackets
- Search Results: mounting brackets for trailer fenders
- Article: Most Popular Wheel Bearings
- Shop: Vehicle Tow Bar Wiring