Parts Needed to Add Electric Drum Brakes to 2016 Wells Cargo Fast Trac 5x8 Enclosed Trailer
Question:
Hello, I have a 2016 Wells Cargo Fast Trac 5x8foot enclosed trailer and am planning to install electric brakes. I was hoping that you could help me to put together a cart including all of the necessary parts. Thanks in advance!
asked by: Max K
Helpful Expert Reply:
We can help you with the parts you need to add electric brakes to your 2016 Wells Cargo Fast Trac 5x8 enclosed trailer. In fact we even have a complete FAQ article on the topic that I have linked for you which includes info on all the items needed. The trailer axle will need to have brake flanges to mount the brakes; you'll need the left- and right-hand brakes themselves, hub/rotors to fit those brakes and spindles, wiring components, a breakaway kit and a brake controller in the tow vehicle.
I linked our page for brake flanges if you do not already have them on your axle. You will need to know your axle diameter. Note flanges must be welded on perfectly straight by a qualified welder who has the required equipment. Select brakes based on the axle weight rating; you can usually find this on a sticker or plate right on the axle. Your new hub/drums must use the same bearings as your existing hubs to ensure they will fit. Pull one of your hubs and note the bearing numbers. Then match new hubs by the bearings and bolt pattern of your wheels (see linked article on bolt patterns).
You'll also need wire like # 10-2-1 and wiring components like those in kit # HM51020, as well as a breakaway kit like # 50-85-315 which will stop the trailer in the event of a disconnect. Finally you'll need a brae controller in the tow vehicle that works with electric drum brakes; a great choice is the Prodigy P2 # 90885 which is easy to set-up and very reliable.
Products Referenced in This Question
Deka Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot
- Wiring
- Wire
- Jacketed Wire
- 2 Wire
- 10 Gauge
- Deka
more information >
Hopkins Deluxe Trailer Wiring Installation Kit
- Wiring
- Tools for Wiring
- Wiring Kits
- Installation Kit
- Hopkins
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Replacement Hub for 2013 Wildwood 26TBSS Hub Drum with AL-KO 8700
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Q&A: How To Add a Fuel Tank To a Truck with 5th Wheel Hitch In Bed
- Q&A: Recommended 16' Mesh Tarp for Dump Trailer
- Q&A: How to Bleed Electric Over Hydraulic Trailer Brakes
- Q&A: Comparing the Curt Q20 and the Curt A20 5th Wheel Hitches.
- Q&A: Which Nev-R-Adjust Brake Assemblies for Load Trail 14K Dump Trailer
- Article: Best Camper Jacks
- Article: How to Choose the Right Trailer Hitch Class
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)