Lighting Requirements for Boat Trailers for Updating to Submersible LED Lights
Question:
I am looking to update my boat trailer with all submersible LED lights. Ive got the below items ed for the Stop/turn/tail, and for the amber marker lights Both clear lens LEDs - but I cannot find the matching lights in Red for the rear marker lights. I need lights that have the quick-connect plug and the grommet mount exactly what the amber version below has - but I cannot seem to find them. Amber marker lights AL91CAB stop/turn/tail: STL22RCB Let me know if you can help! thanks.
asked by: Ryan D
Expert Reply:
For boat trailers we recommend using submersible type lights which have a drain hole to allow water to exit the fixture. We also recommend always disconnecting the trailer connector before backing the boat into the water, even if you have submersible lights.
On the linked page you can view all submersible LED type grommet-mount lights that we offer. Usually a combination stop/turn/tail light like # STL111RB is employed.
I also included a link to a helpful article on the lighting requirements for trailers, which vary depending on the trailer's dimensions and weight. This will allow you to ensure your trailer is compliant with Federal law.
Products Referenced in This Question
GloLight LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 22 Diodes - Oval - Red Lens
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail
- Oval
- Recessed Mount
- Submersible Lights
- LED Light
- 6-7/16L x 2-5/16W Inch
- Red
- Optronics
more information >
Product Page this Question was Asked From
Miro-Flex LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 Diodes - Clear Lens
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail
- Oval
- Recessed Mount
- Submersible Lights
- LED Light
- 6-1/2L x 2-5/16W Inch
- Red
- Optronics
more information >
Continue Researching
- Q&A: Can Red Identification Light Bar be Used as Marker & Reverse Lights
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Q&A: Is There a 5 Bolt Hub With L68149 and LM67048 Bearings
- Q&A: What is the Difference between a Tire Size that Starts with P and ST
- Q&A: Replacement Actuator For An Atwood 171
- Q&A: Can Peterson Rectangular Clearance Light # M170A Replace Square Clearance Light on Trailer
- Q&A: Installing LED Clearance Lights With 2 Wires
- Article: Gooseneck to 5th Wheel Adapters
- Article: Trailer Wiring Diagrams
- Article: Best Camper Jacks
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Trailer Tire Sizing
- Article: Using a Portable Generator on RV
- Article: Where to Position the Trailer Axle?