Availability of Trailer Hitch With 7000 lb + Towing Capacity for 2015 Chevy Express 2500
Question:
Do you sell a hitch that fits my 2015 Chevy Express 2500 that has a towing capacity of at least 7,000 lbs.?
asked by: Bruce T
Expert Reply:
We sure do! I'd recommend the Curt Class IV hitch, part # 14090. This hitch has a 10,000 lb towing/1000 lb tongue weight capacity and is a confirmed fit for your 2015 Chevy Express.
Since it sounds like you'll be towing with your Van, you'll need some other items to complete your towing system. For a trailer wiring harness, you'd begin with a # 118392 4 pole trailer connector. If your trailer doesn't have brakes on it, that's all the wiring you'll need to do but if it does have electric brakes, the wiring will be a little more involved.
If the trailer has electric brakes, you'll need to install a brake controller to actuate them. I'd recommend the Tekonsha Prodigy P2, part # 90085. The P2 is one of our all-time best sellers, because its so easy to use. You'll also need our Brake Controller Install kit, part # ETBC7. I'll link you to the instructions for the install kit, an install video and a helpful FAQ article all of which will help you easily through the installation.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 1000 lbs TW
- 10000 lbs GTW
- 12000 lbs WD GTW
- 2 Inch Hitch
- 1200 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 6000 lbs GTW
- 10000 lbs WD GTW
- 2 Inch Hitch
- 1000 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Replacement Oil Cap for Dexter Hub # 21-35
- Q&A: Recommended Replacement Grease Seal and Braking Assemblies for an AL-KO 7210
- Q&A: Window Cover Recommendation for Class C Motorhome Built on F-550
- Q&A: Is The 1/2" Metal Loom Clamp # A0500 a Single Component Or Multiple Clamps?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What Size Hardware Should Be Used With the Super Titan Forged Pintle Hook Plate
- Q&A: Will the Pintle Hook # 63015 Attach to the Super Titan Pintle Hook Plate # RP38186
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: My Trailer Hitch Doesn't Fit
- Article: Car Camping Checklist
- Article: Determining Trailer Tongue Weight