How to Determine Proper Replacement Bearings for Pontoon Trailer
Question:
I blew out one of my bearings on my pontoon trailer. How do I determine what size bearings to buy. Do I measure the opening on the wheel hub? Thank you
asked by: Tom
Expert Reply:
I can help you figure out what bearing will work for your pontoon trailer.
There are a couple of ways to determine what bearing you will need. Easiest way is if you have the bearing and can find the stamped in part number. I have linked a diagram which shows where to check for the stamped number.
What you will want to do is measure the inner diameter of the bearing, I recommend with calipers like # PTW80157 and if it is 1.063 then the # L44649 will work for your boat trailer. If the bearing is damaged you wouldn't be able to get an accurate measurement from it so then we turn to the spindle and axle weight rating. You will want to take the hub off of the trailer and find the part number on the existing bearings and seals, then you will want to use a digital caliper to measure the bearing seat for the inner and the outer bearing (see diagram). This will help us determine the inner diameter of these bearings. If you know your axle rating this will also help us narrow down what the correct bearings are for you.
When replacing the bearings, you will likely also need to replace the grease seal. If you cannot find a part number on the seal, you will also want to measure the seal seat to have an idea of the seal inner diameter. To find the seal outer diameter, you will want to measure the hub where the outside of the grease seal sets.
Just let me know what bearing measurements or numbers you find, I'd be more than happy to help you find the right part for your pontoon trailer.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: What Exactly is Tongue Weight?
- Q&A: Replacement Microwave for my High Pointe EC942K9E in Stainless
- Q&A: Replacement Microwave for Highpoint # EC942K9
- Q&A: Is LaSalle Bristol XTRM Universal Self-Leveling Sealant Comparable to Dicor Lap Sealant
- Q&A: Comparing Equa-Flex and Road Armor Equalizers For 2000 Forest River WIldwood W/ 5200lb Axles
- Article: How to Rent an RV
- Q&A: What Hitch Gives the Highest Ground Clearance on My 2022 Toyota Sienna?
- Article: How to Charge RV Batteries
- Q&A: What is the Estimated Installation Time for Firestone Ride-Rite Air Bags on a 2006 Ford F-250
- Article: How to Measure a Trailer Axle
- Q&A: Replacement Electric Brakes for Dexter PR-FF SEC-FF 5.2KPR-GGSEC-GG 12X2XQ 36-89
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer