How to Determine the Correct Size Ball to Use For Towing with a 2005 Toyota Matrix and # 24812 Hitch
Question:
Should I get a 1 7/8 or 2 ball for the #24812 hitch on my 2005 Matrix? Thanks.
asked by: Rick
Expert Reply:
Selecting the proper hitch ball has more to do with the trailer coupler and gross weight of the trailer than the trailer hitch installed on your vehicle. The coupler ball size will be stamped into the coupler somewhere, usually on the top. With the 3593 draw bar a short shank ball with a 3/4 inch diameter shank is recommended. We have an article detailing ball selection and information for you to review (see link).
If your trailer has a 2 inch coupler and is no heavier than 3,500 pounds the Hitch Ball with 2 inch Diameter and Short Shank, 3,500 lbs GTW - Chrome, item # 19258, would be a good choice.
If your trailer has a 1-7/8 inch ball and is no heavier than 2,000 pounds the the Hitch Ball with 1-7/8 inch Diameter and Short Shank, 2000 lbs GTW - Chrome, item # 19256, is a good choice.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Continue Researching
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Trailer Tester Battery Replacement for Part Number 8010
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Typical Trailer Suspension Hanger Spacing Relative to Leaf Spring Size
- Q&A: Hanger Spacing for 3500 LB. Tandem Axle Trailer
- Q&A: How To Install a Brake Controller On a Dump Truck
- Q&A: Parts Needed to Install Brake Controller on 2012 Chrysler Town and Country
- Q&A: How Much Upward Bend Should Trailer Axle Have
- Q&A: Replacement for Demco Master Cylinder 05680-C for Drum Brakes
- Article: Rooftop Cargo Carriers
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: RV and Camper Types, RV Classes