Using E-Track Backing Plate to Mount E-Track on the Floor of a cargo Van
Question:
I need to install track on the floor of a cargo van but dont understand how to install the backing plate. I saw your video with the detailed measurements of the plate but no information about how to install it. Do I use it as a giant washer or do I fasten it to the underside of the van before installing the track? If the latter, how is it meant to be fastened to the van?
asked by: Terri
Expert Reply:
Basically, the backing plate for the E-track, # e96RR, is like a giant washer. You will likely need several of them since it is 6-1/2 inches long by 6 inches wide. The fasteners you use will go through the E-Track, through the floor of the van, through the backing plate, and you would put the nuts for the fasteners on at the bottoms of the backing plates. So you are basically sandwiching the van floor between the E-track and the backing plate.
Products Referenced in This Question
etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 2
- Accessories and Parts
- E-Track
- Tie Down Anchors
- E-Track Parts
- 6 Inch Wide
- Backing Plate
- 6 Feet Long
- etrailer
more information >
Product Page this Question was Asked From
etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 2
- Accessories and Parts
- E-Track
- Tie Down Anchors
- E-Track Parts
- 6 Inch Wide
- Backing Plate
- 6 Feet Long
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 2
- Shop: etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Video: Review of etrailer E Track - E-Track Rails 4 Pack - e42VR
- Video: etrailer Horizontal E-Track Review
- Q&A: Attaching E-Track to Wooden Trailer Floor
- Q&A: Are Backing Plates Required To Install Erickson E-Track System
- Q&A: Installation Recommendations For E-Track Horizontal Track System In Trailer With 2x6 Floor
- Shop: Erickson Roller Idler for E Track - 3,300 lbs
- Shop: etrailer Horizontal E Track - Galvanized Steel - 2,000 lbs - 94" Long
- Shop: etrailer Horizontal E Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4
- Shop: Erickson E-Chock Wheel Chock for E Track - Powder Coated Steel - Qty 1
- Video: Review of Erickson ATV-UTV Tie Downs - 4 E-Track Ratchet Straps and Wheel Chock Tie-Downs - EM98CV
- Video: Review of etrailer Tools - Hitch Tools - Measuring Devices - e99044
- Article: Determining Trailer Tongue Weight
- Q&A: How to Properly Weigh my Trialer to not Exceed my Vehicles Towing Weight Rating
- Q&A: Scale For Determining Travel Trailer Tongue Weight
- Shop: Ratchet Tie Down Straps w/ Storage Bag - 12' Long x 1-1/4" Wide - 830 lbs - Qty 4
- Video: Review of Erickson Tie Down Straps - Roller Idle Ratchet Strap and E-Chock Set - EM58523-09162
- Video: B and W Tie Down Anchors - Trailer Tie-Down Anchors - BWMC2301 Review
- Q&A: Tie Down Recommendation for Securing Honda Goldwing Trike to Trailer
- Q&A: Charging a Trailer Breakaway System Battery Using the 12 Volt Circuit on a 7-Way Connector
- Article: How to Install E-Track in 3 Easy Steps
- Video: etrailer Campers and Utility Trailers Tongue Weight Scale Review
- Search Results: e~track
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: Brake Controller