Parts Needed to Flat Tow 2016 Jeep Wrangler Unlimited Behind an RV Using Duncan Towmatic II Tow Bar

Question

Question:

I would like to adapt a Duncan towmatic II tow bar to it is this workable??

asked by: Donald E

0

Expert Reply:

Adapter # RM-038 is designed to work with a Duncan Towmatic II tow bar so that you can use the tow bar with Roadmaster base plates.

For base plates that are compatible with the tow bar, if your 2016 Jeep Wrangler Unlimited has the factory bumper use # RM-521448-4.

For a Warn Elite bumper use # 1439-1
For a Rubicon Hard Rock Edition use # 1444-1

You will also need quick disconnects # RM-201 to be able to use the adapter with the tow bar and still have the base plate arms be easily removable.

Next you will need safety cables # RM-643. The coiled design helps keep the cables off of the ground. For lighting I recommend diode kit # RM-154. Once installed you won't have to do anything with it again. I have linked a video showing an example installation for you.

You may also need a high/low adapter to keep the tow bar level. I have linked a help article showing how to measure and a link to the high/low adapters we carry.

And finally, most states now require supplemental braking on the vehicle being flat towed. One of the preferred systems for our installers and what I recommend is the SMI Stay-IN-Play DUO proportional system, # SM99251. It will apply the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles. I have linked a video showing installation for you.

Be sure to consult your vehicle owners manual for specific information on flat towing the vehicle. I have also included some helpful links to our series of help articles on flat towing for you.

expert reply by: Michael H

0

Answer 1

Towing your vehicle behind your motor home requires a number of components: tow bar, base plates, safety cables, tow bar wiring and a supplemental braking system. Please refer to the linked article which provides details for each of these items. I…

view full answer...

Answer 2

The RoadMaster Base Plates to Duncan Towmatic II, Karbar and EazAligner Tow Bars Adapter #RM-038 comes with all the hardware need to attach your base plate to your towbar. If you have an XL or EZ brackets you will need the Roadmaster Tow Bar Quick…

view full answer...

Answer 3

As you mentioned, you'll need the #RM-038 adapter which will allow your Duncan tow bar to work with a Roadmaster base plate. You'll want to use the Roadmaster EZ4 base plate, part #RM-521447-4. The EZ5 base plate you'd looked at part…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 6

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 9

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 10

My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…

view full answer...

Answer 11

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…

view full answer...

Answer 12

Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the breakaway…

view full answer...

Parts Needed to Flat Tow 2016 Jeep Wrangler Unlimited Behind an RV Using Duncan Towmatic II Tow Bar

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching