Does # CE Smith Bunk-Style Guide-Ons for Boat Trailers # CE27600 Come with Both Sides of Trailer

Question

Question:

when you say 1 set do tou for both sides for bunk style ?

asked by: Billy A

0

Expert Reply:

The CE Smith Bunk-Style Guide-Ons for Boat Trailers # CE27600 that you referenced comes with guide on bunks for both sides of your trailer. I attached a review video for you to check out as well.

expert reply by: Jameson C

0

Answer 1

I spoke with my contact at CE Smith and the wood in the Carpeted Bunk Boards #CE27600 is a non-treated wood. The carpet though is marine grade carpeting.

view full answer...

Answer 2

You can simply mount the Boat Trailer Deluxe Roller Bunk, part #DL21740, by just screwing or bolting it in. The mounting brackets, Boat Trailer Roller Bunk Bracket, part #DL21742, are optional in mounting part #DL21740, and are not required. If you…

view full answer...

Answer 3

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 4

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 5

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 6

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 7

For all intents and purposes, yes, the Fulton drop leg stabilizer jack SJL80300 is the same as the square leg jack you asked about: - Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs #SJ-R208 Different manufacturers but otherwise they…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

The best option for a Class C motorhome windsheild cover is going to be the Adco Deluxe Cover part #290-2507 which is designed for Class C motorhomes just like yours. I attached a review video for this cover for you to check out as well.

view full answer...

Answer 10

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 11

The adjustment holes on the Super Titan Forged Pintle Hook Plate part #RP38186 are 17/32" diameter so they will accept and are designed to be used with 1/2" bolts. It should not matter what brand pintle hook is used as the hole size and…

view full answer...

Answer 12

The closest match we have is the part #e54SR which is for a 3,500 lb axle and is 25-1/8 inches long. It would be a bit longer than what you have but it would work.

view full answer...

Does # CE Smith Bunk-Style Guide-Ons for Boat Trailers # CE27600 Come with Both Sides of Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching