Trailer Hitch and Wiring Recommendation for a 2016 Porsche Cayenne Hybrid
Question:
2016 Cayenne Hybrid trailer hitch.. I see your recommendation on the correct hitch but what about a wiring harness? Do you supply one for this vehicle?
asked by: Aaron
Expert Reply:
For your 2016 Porsche Cayenne S Hybrid we offer the Draw-Tite Trailer Hitch, part # 75950 that is confirmed as a fit and would work well.
For trailer wiring the only option we can recommend at this point is the ZCI kit part # 119250KIT which is a universal wiring kit that requires no hardwiring. Basically you will test the wires of your vehicle taillights for the proper function and then clamp the connectors of this wiring kit on them and they will be able to sense the wiring function of the tow vehicle and supply the correct trailer wiring functions.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
![Jameson C](https://images.etrailer.com/static/images/catg/people/371_tn.jpg)
Products Referenced in This Question
ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 750 lbs TW
- 7500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Leaf Spring Replacing Dexter 072-078-00 For 4,400 lb Axle
- Q&A: Replacement Leaf Spring for Trailer with Dexter 4,400 lb Axle
- Q&A: How To Install HBA-CAM Hydrastar Adapter
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Determine Correct Rise or Drop for Blue Ox SwayPro Weight Distribution System
- Article: Trailer Maintenance Schedule
- Q&A: 5th Wheel Hitch and Rear Trailer Hitch for a 2005 Freightliner M2 106
- Q&A: Installing a Brake Controller on a 2000 Dodge Full Size Van
- Q&A: Brake Controller and Wiring Recommendation for a 2008 Ford Explorer Towing Trailer with 6-Way
- Article: Rooftop Cargo Carriers
- Article: Trailer Wiring Diagrams
- Article: 2005-Current Volkswagen Touareg, Audi, or Porsche Cayenne
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: Troubleshooting Brake Controller Installations