Product Availability for Adapting Jeep Off Road Bumpers to Roadmaster Tow Bars

Question

Question:

Are these available to purchase yet?

asked by: Joy

0

Expert Reply:

Yes, the part # RM-035 that you referenced is available for purchase. I attached a link below that will allow you to add it to your cart.

These Roadmaster adapters will adapt the Roadmaster tow bars to off-road bumpers. This will allow you to connect motorhome-mounted tow bars to the bumper mounts. The Jeep bumper mounts can have either a 7/8 inch or 1 inch diameter hole. The # RM-035-1 is for bumper mounts that are 1 inch thick and the # RM-035 is for bumper mounts that are 3/4 inches thick.

expert reply by: Jameson C

0

Answer 1

I was able to find the diameter of the hole where the tow bar attaches to for the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars #RM-035-1. As you can see by the accompanying diagram, the holes are 1 inch in diameter. I…

view full answer...

Answer 2

I contacted Roadmaster on your behalf and they confirmed this bumper will be fit with the #RM-035 if the tab for the D-rings are 3/4" however you will need to confirm that the Barricade Adventure HD Bumper is rated for towing first. We also have…

view full answer...

Answer 3

No, having play in the your Roadmaster D-Ring Mount Adapters #RM-035-1 can cause friction which will lead to them failing. You'll want to measure the thickness of the your D-Ring mount and order accordingly. based on the picture you provided it…

view full answer...

Answer 4

The dimensions of the bumper mount adapters for Jeep Wranglers #RM-035-1 which is 1 inch and #RM-035 which is 3/4 inch is referring to the thickness of the shackle mounts. They have adapter pins which allow them to fit 1 inch and 7/8 inch diameter…

view full answer...

Answer 5

Before you purchase any adapters you will need to first verify with Smittybilt that your specific bumper is rated to be towed from the D-Rings. They make quite a few bumpers and only a few are actually rated for flat towing. If you're measuring…

view full answer...

Answer 6

We have had enough customers report back that the Roadmaster D-Ring Adapters like part #RM-035-1 do work with the Demco tow bars so it would work with your Aluminator.

view full answer...

Answer 7

The total width of the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars part #RM-035-1 is 2-1/8" which is measured from the outside of the ears.

view full answer...

Answer 8

Yes, we have spoken with Demco and they have confirmed that the Roadmaster Adapter part #RM-035 that you referenced will work with your Demco Dominator tow bar part #DM9511008.

view full answer...

Answer 9

There is an attachment available for your d-rings on your Jeep Wrangler. If you have 1 inch D-ring bumper mounts, then you will want the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick #RM-035-1. If you…

view full answer...

Answer 10

We currently have two d-ring bumper adapters which are the Adapter for Jeep D-Ring Bumper Mounts part #RM-035 for 3/4" thick or part #RM-035-1 for 1" thick. These adapters are for factory bumpers with d-rings that are suited for flat…

view full answer...

Answer 11

While we do not have the Blue Ox EZ Light Wiring Harness that you mentioned installing on your Jeep, I was able to locate the installation instructions for the kit. It looks like the converter box that you mentioned is designed to protect the wiring…

view full answer...

Answer 12

There are definitely some products that can help you with that. Roadmaster recommends using a dry silicone spray lubricant like #RM-747, as grease or WD-40 can actually cause dirt and debris to stick, making the problem worse. Before lubricating,…

view full answer...

Product Availability for Adapting Jeep Off Road Bumpers to Roadmaster Tow Bars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching