How To Mount Redline Rear Hanger # 30-20 On A Trailer
Question:
I noticed on the rear spring hanger, the one with the bushing, the hole is off center. Which way should the offset hole be facing, forward or aft?
asked by: Craig W
0
Expert Reply:
On the Redline Rear Hanger, part # 30-20, the hanger has top stamped into one of the sides of the hanger. The hanger is welded to the trailer with the side marked top, facing the outside of the trailer with the word top showing.
I am including a picture of the hangar that shows the top marking and how it is positioned on the trailer.
expert reply by:
Jeff D
0
Product Page this Question was Asked From
Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 2-1/8 Inch Tall
- Single Axle
- Dexter
more information >
Continue Researching
- Shop: Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
- Shop: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs
- Video: Optronics Trailer Lights - Tail Lights - TLL9RK Review
- Shop: Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 30-20 Review
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Video: Easy Swivel Trailer Jack Installation
- Video: Dutton-Lainson Trailer Jack - Side Frame Mount Jack - DL22800 Review
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Q&A: Should Knurls of Trailer Suspension Bolts Interfere with Fitting Into Bushing
- Q&A: Setting Distance Between Front and Rear Hangers of Trailer Suspension
- Q&A: Play When Installing Redline Wet Equalizer Bolt with Locknut and Grease Zerk # 126B2
- Search Results: 28~5
- Search Results: trsl275
- Q&A: How is the 30-20 Hanger Designed For Mounting On Its Side and Not Facing Down
- Shop: Suspension Enhancement
- Search Results: shackle strap
- Search Results: 3500 lb axle and spring kits
- Article: Double-Eye Trailer Suspension System Review
- Search Results: trailer drop axle
- Search Results: hangers trailer leaf spring suspension
- Shop: Trailer Hitch
- Search Results: aps5
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Q&A: How Does the Rear Hanger Get Welded to the Trailer Frame
- Q&A: Spring Hanger Dimension Recommendations for Installing a e34SR Leaf Spring
- Video: Dutton-Lainson Sidewind Swivel Trailer Jack Review
- Video: Review of Dexter Trailer Leaf Spring Suspension - Hangers - DX54CR