Weight Distribution for a 2015 Outdoor Wind River 250RDSW and 2011 Toyota Tundra
Question:
We are purchasing a 2015 Outdoor Wind River 250RDSW and will be pulling it with a 2011 Tundra with 5.7 motor. We are looking at an equalizer hitch thru etrailer. The dealer is trying to sell us a center line hitch for $700. What would you recommend in an equil-l-zer hitch?
asked by: Allen M
Expert Reply:
I did a little research and found that your 2015 Outdoor Wind River 250RDSW travel trailer has a gross weight capacity of 8,700 pounds. This would make the tongue weight 870 to 1,305 pounds. To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle.
Based on the potential tongue weight of the trailer I recommend the 1,400 pound Equal-I-zer system, # EQ37140ET, if the tongue weight is 1,000 to 1,400 pounds. If the total tongue weight does not exceed 1,200 pounds then # EQ37120ET rated for 800 to 1,200 pounds will work.
For either system the shank and 2-5/16 inch ball are both included! But we do recommend thin-walled socket # ALL643216 to install the ball. I have included some links to videos and help articles on weight distribution and determining tongue weight for you.
Products Referenced in This Question
1-7/8" 12pt Thin Walled Socket - 3/4" Drive - Chromium-Vanadium Steel
- Hand Tools
- Ratchets and Sockets
- Sockets
- SAE
- 3/4 Inch Drive
- 1-7/8 Inch
- Alloy Steel
- Powerbuilt
more information >
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 14,000 lbs GTW, 1,400 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1200 lbs
- 1300 lbs
- Equal-i-zer
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Will the Draw-Tite Trailer Hitch Fit a 2022 Volvo XC90 Recharge
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Article: Determining Trailer Tongue Weight
- Q&A: Replacement Trailer Grease Seals for Allis 5013 29772
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is Difference Between Overslung and Underslung Trailer Coupler
- Q&A: Can I Extend My Hitch Without Using TorkLift Hitch and SuperTruss Extension
- Q&A: Recommended TorkLift Hitch and Extension for a 2024 Chevy Silverado 3500
- Q&A: Can the TorkLift Everest Weight Distribution System Be Used w/ a SuperTruss Extension?