Replacement LED Wrap-Around Tail Lights For 1998 Jayco Eagle Trailer
Question:
Hi, I am looking on your site to purchase and update my old broken rear wraparound taillights to my 1998 Jayco Eagle popup trailer. The license plate bracket is also broken on the mount. My question is what LED wraparound light is the correct replacement for both taillights and the correct mount for the license plate? Can you give me the LED options for all the other lights on the trailer as well? Also, I watched a video about one of the led replacements and want to know if the mount needs to be replaced to go to the LED version? Is there a plug that needs to be installed from the current wiring to the rear lights to convert to LED? Heres the old lights: Left light with license plate holder P/N: SAE-A116LPCPC2RSS2TT2-97-DOT Right Light P/N: SAE-A116PCPC2RSS2TT2-97-DOT
asked by: Brian B
Expert Reply:
The numbers you provides are actually the numbers for the lens and not the wraparound lights on your Jayco trailer.
From my research I found the Wesbar wrap-around LED light for the right hand(passenger side) that uses the lens you mentioned is part # 271594. For the left hand you need part # 271595. The left hand light has 8 functions, Stop, Turn, Tail, Rear Clearance, Rear Reflex, Side Marker, license plate light, and Side Reflex. The right hand has the same functions except the license plate light. The lights do come with a 2-pole wiring connector.
You can either cut the connector off and hardwire the lights or you can use part # HM47965. You would just cut this extension in half and hardwire it to your trailer. Then you would have a quick disconnect for the lights.
For the license plate bracket, you can check out the attached link to see if you can find the license plate bracket that will work for you.
As far as the other lights, you will need to pull the lights you want to replace and see if you can find the manufacturer and model number of the lights. It will not be on the lens, but may be stamped on the light body or the back of the light assembly. If you cannot find the numbers let me know the dimensions and the wiring and mounting configurations, and I will see if we have replacements that will work for you.
Products Referenced in This Question
Hopkins 2-Pole Flat Wiring Extension - 12" Long
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 0 - 5 Feet Long
- 2 Pole
- Plug and Lead
- 2 Pole
- Hopkins
more information >
Product Page this Question was Asked From
Wraparound LED Tail Light for Trailers Over 80" - 8 Function - Submersible - Red - Driver
- Trailer Lights
- Tail Lights
- License Plate
- Rear Clearance
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Rectangle
- Surface Mount
- Submersible Lights
- LED Light
- 7-L x 3-3/4W Inch
- Red
- Wesbar
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Availability of 7-1/2-inch-long V-Shaped Replacement Keel Roller for Boat Trailer
- Q&A: LED Trailer Taillight Recommendation for a 3110 Feather Lite Car Trailer
- Q&A: Converting From 7-Way Round to 7-Way Flat Connector
- Q&A: Wiring Diagram for 7-Way Round Pin Trailer and Vehicle Side Connectors
- Q&A: Automatic Transfer Switch For 30 Amp Service
- Article: Will Flat Towing Blow Up Your Transmission?
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Q&A: Correct Replacement for Advent Analog Wall Thermostat ACTH1
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2023 Holiday Must Haves
- Article: Best Ladder Racks
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: Big Truck Big RV