Can 2006 Jeep Wrangler be Flat Towed Behind RV Using Bulldog Stubby Bumper  

Question:

Expert Reply:

Yes you can use the Bulldog Stubby bumper # BDW21000 for flat towing your 2006 Jeep Wrangler. After installing the bumper you will just need the right components to flat tow the Jeep using the bumper. You will need brackets # BX88357 and a compatible tow bar. I recommend the Alpha, # BX7380, since it is rated for 6,500 pounds and comes with safety cables.

Next you will need a lighting solution. I recommend diode kit # RM-154 because once it's installed you will not have to worry about it again. I have linked a video showing an example installation.

You may also need a high/low adapter to keep the tow bar level. I have linked a help article showing how to measure and a link to the high/low adapters we carry.

And finally, most states now require supplemental braking on the vehicle being flat towed. One of the preferred systems for our installers and what I recommend is the SMI Stay-IN-Play DUO proportional system, # SM99251. It will apply the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

The # RM-88400 relay is required to prevent the towed vehicle's turn signal from overriding the signal from the RV if your towed vehicle is wired with a standard 4-diode kit.

Be sure to consult your vehicle owners manual for specific information on flat towing the vehicle. I have also included some helpful links to our series of help articles on flat towing for you.

expert reply by: Michael H

0