Installing a Transmission Cooler on a 2000 Honda Odyssey
Question:
I see you have a video showing how to install a tranny cooler on a 2006 Odyssey. Is the installation pretty much the same for a 2000 Honda Odyssey? I am mostly concerned about how to route the hoses and identifying the proper lines to connect to.
asked by: JJ
Expert Reply:
The 2000 and 2006 Honda Odyssey are different generations so installation will not be 100 percent the same on your 2000 as the video shows for the 2006. Basically, the difference is locating the proper lines on the transmission.
Here is an easy way to find out the right lines. With the vehicle cold, start the motor, step on and hold the brake, and shift into drive for about 15 second or so (you could also shift from drive to reverse and back a few times). Then put the vehicle in park and release the brake. Next get under the vehicle and find the lines coming from the transmission. One should be noticeably cooler. That is the return line. The hot one is the line that goes to the factory cooler.
Other than that using the video for the 2006 will be a good guide for the rest of the installation.
Product Page this Question was Asked From
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Mid-Size Truck
- SUV
- Van
- Standard Mount
- 11W x 8-3/4T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Base Plate for Tow Bar
- Shop: etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates - RV Mount - 6,000 lbs
- Shop: Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Shop: Roadmaster EZ Base Plate Kit - Removable Arms
- Search Results: base plates
- Article: Transmission Cooler
- Video: etrailer SD Non-Binding Tow Bar Review
- Video: Review of etrailer Tow Bar - Hitch Mount Style Roadmaster Base Plates - e44ZR
- Shop: etrailer XHD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates - RV Mount - 10,500 lbs
- Video: etrailer SD Non-Binding Tow Bar Installation - 2020 Chevrolet Equinox
- Video: Roadmaster Quick Disconnect Tow Bar Base Assembly Installation - 2012 Fiat 500
- Shop: Roadmaster Tow Bar Cover
- Shop: etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates - RV Mount - 6,000 lbs
- Shop: Replacement Quick Disconnect Crossbar Assembly for Roadmaster Tow Bars
- Video: Trailer Wiring Harness Installation - 2000 Honda Odyssey
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Right Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Brake Controller
- Article: How to Choose the Right Trailer Hitch Class
- Video: Roadmaster Tow Bar Wiring - Splices into Vehicle Wiring - RM-15267 Review
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: tow bar
- Search Results: base plate
- Q&A: Choosing Between the Brake Buddy Select 3 and the Blue Ox Patriot Supplemental Braking System
- Shop: Vehicle Tow Bar Wiring
- Article: Trailer Wiring Diagrams
- Shop: Vehicle Tow Bar Brake System