Is it Necessary to Torque Hitch Bolts with a Torque Wrench on a Trailer Hitch for a Mazda CX-9

Question

Question:

Is it necessary to use a torque wrench to install this hitch? What is the torque spec?

asked by: Mike

0

Expert Reply:

Yes you should torque the bolts down properly with a torque wrench. Torque wrenches can be found at any store that carries a good selection of automotive tools.

The torque rating for the bolts with this hitch, currently, are listed for 76 Lb.-Ft. This number can change if the manufactuerer changes hardware or if Mazda were to adjust the frame, so always check the instructions included with the hitch for torque rating.

expert reply by: Patrick B

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 4

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 9

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, the EcoHitch Invisi Trailer Hitch Receiver #306-X7211 is confirmed to fit your 5 door 2013 Subaru Impreza Sport Hatchback that has the single exhaust tube. Your Impreza must have the knockout panel in the center or the lower rear fascia to use…

view full answer...

Answer 12

Happy Monday to you as well! I do have a potential solution for you. We do not carry a draw bar with a true 0" rise, but what you can do is use the Curt Class 2 Drawbar #C45503. This has a 3/8" rise, and will be the closest thing we have to…

view full answer...

Is it Necessary to Torque Hitch Bolts with a Torque Wrench on a Trailer Hitch for a Mazda CX-9

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching