Ratchet Straps to Secure Zero Turn Mower to Trailer
Question:
I have a small lawn cutting business and need some Tie down straps. I have a JD 60inch zero turn mower and a 12foot Holmes trailer with d rings at each corner. The mower weighs a little under 1400 lbs. The company I purchased the trailer from said I should purchase 10 ft straps and a was thinking of Erickson EM34416 2 x 10 straps. Do you think this is a good choice? Thanks
asked by: David C
Expert Reply:
The Erickson # EM34416 Ratchet Straps you mentioned would be ideal. Each strap has a 3300 lb break strength or a 1100 lb safe working load limit. When both straps are used at the same time, there's plenty of capacity for your 1400 lb mower.
I've used a shorter version of these straps in the past to secure some PWC's to the trailer, and they worked perfectly.
You'll want to make sure that a 10 foot length will be long enough. Load the mower on the trailer, and have a helper hold the end of the measuring tape and the tie-down. Route the tape the same way as you'd run the strap until you get to the other D-ring, making sure that the distance isn't greater than 10 feet. If it is, we'll need to look at a different strap.
Erickson offers a 15 foot strap with a 1300 lb working load limit, part # EM51330. These straps are sold individually, not as a set of two.
If you'd like to see a product description video featuring the straps, click the provided link.
Products Referenced in This Question
Erickson Ratchet Tie-Down Strap w/ Double J-Hooks - 1-1/2" x 15' - 1,300 lbs
- Ratchet Straps
- Trailer
- Truck Bed
- Double-J Hooks
- 1 Strap
- Manual
- 11 - 20 Feet Long
- 1-1/8 - 2 Inch Wide
- 1201 - 1500 lbs
- Erickson
more information >
Product Page this Question was Asked From
Erickson Re-Tractable Ratchet Straps w/ Push Button Releases - 2" x 10' - 1,100 lbs - Qty 2
- Ratchet Straps
- Trailer
- Truck Bed
- S-Hooks
- 2 Straps
- Retractable
- 6 - 10 Feet Long
- 1-1/8 - 2 Inch Wide
- 851 - 1200 lbs
- Erickson
more information >
Continue Researching
- Shop: Trailer Hitch
- Video: Hopkins Endurance Easy-Pull 4-Pole Flat Trailer Harness Installation
- Shop: Hopkins Endurance Easy-Pull Harness with 4-Pole Flat Trailer Connector - Trailer End - 25' Long
- Search Results: trailer wiring
- Article: Trailer Wiring Diagrams
- Shop: Erickson Re-Tractable Ratchet Straps w/ Push Button Releases - 2" x 10' - 1,100 lbs - Qty 2
- Shop: Erickson Re-Tractable Ratchet Straps w/ Push Button Releases - 1" x 6' - 500 lbs - Qty 4
- Search Results: trailer gate ramp
- Search Results: sway control trailer hitch ball mount
- Search Results: trailer ramps
- Search Results: anti~sway bars
- Q&A: How to Determine Speed Rating for Special Trailer Tires
- Shop: CargoSmart Horizontal or Vertical X Track - Matte Black - Steel - 667 lbs - 5' Long
- Shop: Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Shop: Trailer Wiring
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Lippert Solera Slider Slide-Topper Review
- Search Results: 68149
- Shop: Brake Controller
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Video: Choosing the Right Brake Controller
- Article: Trailer Tire Sizing
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Shop: Fifth Wheel Hitch