Replacement Lens for Bargman 59 Series Clearance Lamp

Question

Question:

The one I need is for an 2005 23RS Outback. Description on lens: T. BARGMAN 59 - SAE- A- P2 - 83 According to my measurements: 4inch L X 2inch W X 1/2inch H

asked by: Ricardo S

0

Expert Reply:

We have the exact replacement for the broken lens on your 23RS Outback, part # 34-59-012. The lens you mentioned, part # A32AB is manufactured by Optronics so I couldn't say it it'll fit your Bargman lamp. I'd recommend going with the # 34-59-012 is the fit is a sure thing.

expert reply by: Mike L

0

click to enlarge

Answer 1

The correct replacement for a Power Gear Motor 1010001093 is the Replacement Motor for Lippert Power Gear Electric Leveling Jack System part #LC89CJ.

view full answer...

Answer 2

I have a solution for you, but because Winnebago does not have a company that they allow to make aftermarket lights for, we won't have an exact replacement for the Winnebago part #113709-01-000. I recommend going with the Peterson Thin Line…

view full answer...

Answer 3

If you are looking for a red lens for your Bargman 59 Series light you would want part #34-59-010, if you need an amber lens you would need part #34-59-012.

view full answer...

Answer 4

I was able to look up your previous order and find that your Dexter Axle came with the Inner bearing #L68149 and outer bearing #L44649. A great replacement kit for these bearing numbers is the #BK2-100, it will include the inner and outer bearing and…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 10

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Replacement Lens for Bargman 59 Series Clearance Lamp

Product Page this Question was Asked From

Continue Researching