Can a Brake Controller be Installed in the Console Pocket on a 2004 Ford F-250
Question:
Hello, I have a 2004 F-250 and I am looking for a brake controller that will fit in the small dash pocket next to the lighter. I noticed in your install videos that you usually screw them on with a bracket just below this dash pocket. Really I am just looking for a much cleaner install.
asked by: Aaron R
Expert Reply:
Proportional brake controllers need to be mounted in a specific orientation which is why they have mounting brackets. If a proportional controller is not mounted according to the specifications in the installation instructions then it will have erratic behavior.
But if you go with a time delay brake controller such as # C74VV then it just has to be within easy reach of the driver and doesn't have to be fixed in position. This would allow you to put the controller in that small pocket.
If you go with one of the above controllers you will also need a wiring harness to plug the controller directly into the truck. For Curt brake controller # C74VV you will need # C51322. For the Draw-Tite Activator, # 5520, you will need # 3035-P. I have included a link to information on brake controllers as well.
Products Referenced in This Question
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford, Lincoln, Mercury
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- CURT
more information >
Curt Venturer NEXT Trailer Brake Controller - 1-3 Axles - Time Delayed
- Trailer Brake Controller
- Time Delayed Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 3 Axles
- LCD Display
- Up to 360 Degrees
- CURT
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
- Article: Most Popular Wheel Bearings
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Parts Needed To Install A Brake Controller On A 2023 Freightliner Cascadia
- Q&A: Parts Needed to Install 7-Way/4-Way on 2024 Kia Telluride with LED Taillights
- Q&A: How do I Tell if the Brake Controller is Bad
- Q&A: Lift Kit Options For A 2015 Winnebago Micro Minnie 1706FB
- Q&A: How Is Spring Bar Tension Set Up with Trailer Weight Distribution System