Can Chain and Hooks be Routed through Stake Pocket Tie Down with D-Ring for Trailers
Question:
I was wondering if this stake pocket T355 with the 1-3/8inch d-ring opening would be able to put a 3/8inch tie down chain with a hook, threw the d-ring and also use a binder for a Kioti 3200# compact tractor . I have to use 2 chains with load binders running them through the stake pockets ,through the tractor frame and another chain through the back axles.
asked by: Jerry
Expert Reply:
The 3/8 inch chain would not be a problem but the hook could be depending on its size. If you can't run the chain through backwards or there are hooks on both ends of the chains you have then the hook needs to be less than 1-3/8 inches high and 2 inches wide (at any angle that would allow it to slip through the opening on # T355) for this to work. We have some chains but none that are designed for this type of application.
But we do have load binders if you need them. I have included a link to the options for you.
Product Page this Question was Asked From
Stake Pocket Tie-Down Anchor - Black Powder Coat - 1-3/8" D-Ring - 1,600 lbs
- Tie Down Anchors
- Trailer Tie-Down Anchors
- Truck Tie-Down Anchors
- Stake Pockets
- 5000 lbs
- Stake Pocket Anchor
- Brophy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: BulletProof Hitches 2-Ball Mount for 2" Hitch - 8-1/4" Drop, 8-3/4" Rise - 14,000 lbs
- Search Results: stake bed tie downs
- Shop: Stake Pocket Tie-Down Anchor - Black Powder Coat - 1-3/8" D-Ring - 1,600 lbs
- Shop: Brophy Stake Pocket Tie Down Anchor - Black Powder Coat - 3" D-Ring - 4,000 lbs
- Search Results: stake pocket d ring
- Search Results: stake pocket d rings
- Search Results: stake pocket
- Search Results: chain
- Search Results: stake pocket mount
- Search Results: chain hooks
- Video: B and W Ball Mounts - Adjustable Ball Mount - BWTS10040B Review
- Shop: Brake Controller
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: BulletProof Hitches 2-Ball Mount for 2" Hitch - 6-1/4" Drop, 6-3/4" Rise - 14,000 lbs
- Shop: Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
- Shop: B&W Tow & Stow 2-Ball Mount - 2" Hitch - 7" Drop, 7-1/2" Rise - 10K - Black
- Video: Optronics Trailer Lights - Clearance Lights - MCL35AEBP Review
- Q&A: Correct Tire Cover Size for ST235/80R16 Trailer Spare Tire
- Article: Basics of Tie Down Straps
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Q&A: Fuse Location for 12-Volt Accessory Feed to 7-Way Trailer Connector on 2005 Chevy Silverado
- Q&A: Activating 12-Volt Accessory Circuit to 7-Way on 2004 Chevy Silverado 2500
- Article: Trailer Wiring Diagrams
- Article: Best Ladder Racks
- Q&A: What Load Range Tire is Needed for a 10,000 lb Trailer
- Q&A: One Side of Trailer Brakes Work But Other Side Does Not But Uses Same Wire
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Accessories For Curt Rebellion XD For Pulling Wagons
- Q&A: What Size Lunette Ring Will the Buyers Products 30 Ton Pintle Hook Fit
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision