Is Additional Hardware Needed for Thule Universal Mounting Kit # 7533998

Question

Question:

Which fasteners go with the bolts in the set? The reviews sound like there are none included. Thanks.

asked by: Miriam

0

Expert Reply:

For Thule Universal Mounting Kit # 7533998 the nuts for the screws are fixed in the clamping parts so there is no additional hardware for them. The ends that attach to the ski rack attach to the rack with nuts that should already be on the rack. They should be M6 nuts to match the screws. We have M6 nut # 185916.

expert reply by: Michael H

0

Answer 1

The Replacement Mounting Brackets and Hardware for Thule Pull Top Slide-Out Ski and Snowboard Carrier #TH753277902 will work if the holes are 4 inches apart on center.

view full answer...

Answer 2

The nuts are built into the bottom bracket. They are not a loose part that you will have to thread on manually. This makes it easier to install the feet to the crossbars. I have incldued a picture pointing out the nut.

view full answer...

Answer 3

I would need to know which Thule ski rack you have. You may be able to use Universal Mounting Kit, #7533998. Depending on the age and model of the ski carrier you have, this kit may or may not work. Thule states that this kit is compatible with all…

view full answer...

Answer 4

The Thule Flat Top Ski Carrier, which is no longer in production, was/is directly compatible with Thule square crossbars. There isn't a comprehensive list of vehicles that it works with because it isn't specific to the vehicle but to the…

view full answer...

Answer 5

It looks like you have the older Thule Flat Top Ski Carrier and in which case you can purchase the Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks part #7533998 to mount them onto factory aero crossbars. This kit will replace the…

view full answer...

Answer 6

That looks like an older Thule Flat Top ski rack. For a mounting hardware kit that allows it to fit newer style roof racks we have the #7533998 which will work on your 2017 Subaru Outback.

view full answer...

Answer 7

I reached out to Thule and unfortunately they do not offer replacement speed-link hardware for their Ski carriers and Part #7533998 is not compatible, as it is intended for the older FlatTop models. If you'd want to replace the carrier, I'd…

view full answer...

Answer 8

Thank you for the information and the photos! According to what you sent in it looks like you have one of the discontinued Thule Flat Top (TH91724 or TH91725) or Pull Top (TH91726) carriers. These came with universal mounting hardware as well as an…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Is Additional Hardware Needed for Thule Universal Mounting Kit # 7533998

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching