Will Trailer Hitch from 2011 Chrysler Town and Country Fit 2016 Town and Country
Question:
Have 2011 Chrysler Limited mini van with 2 inch drawbar hitch purchased from you when van was new. Considering purchase of a new 2016 Chrysler Limit mini van as exact replacement. I want to know if the hitch is the same for 2016 model as 2011 model? Will remove before trade in and install on new van if the holes will all line up correctly.
asked by: James H
Helpful Expert Reply:
The Class III, 2 inch receiver, trailer hitches confirmed to fit the 2011 Chrysler Town and Country are also confirmed to fit the 2016 Town and Country. The Class III trailer hitches that will fit both vehicles are:
Curt Class III Receiver Hitch # 13364
Draw-Tite Class III Max Frame Receiver Hitch # 75579
When installing a trailer hitch for the second time, new installation hardware should be used. For new hitch installation hardware, you can use # RHK and enter your trailer hitch's manufacturer in the drop down menu and part number in the box on the product page.
I have attached an installation video of the # 75579 hitch for you.
![Victoria B](https://images.etrailer.com/static/images/catg/people/816_tn.jpg)
Products Referenced in This Question
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Replacement Hardware Kit for Trailer Hitches
- Accessories and Parts
- Trailer Hitch
- Hardware
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Where to Lubricate Dexter Nev-R-Adjust Electric Trailer Brakes
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: My Trailer Hitch Doesn't Fit
- Article: Can You Flat Tow a Ford Escape?
- Q&A: Pulling Breakaway Switch Pin Causes Battery Box to Burn and Melt and Running Lights Stay On
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Frequently Asked Questions About Transmission Coolers
- Q&A: Spring Hanger and Axle Diameter Measurements for Installing Leaf Springs on Single Axle Trailer
- Q&A: Replacement for A-Frame Coupler With Yoke Latch
- Q&A: Adding Electric Brakes To 2,200lb Dexter Torsion Axles
- Q&A: Recommended Replacement for Atwood OD5001CW Direct Water Heater