Swapping Hitch Between Different Generations of Same Vehicle
Question:
Will the 24865 hitch fit both a 2012 Ford Fusion as well as a 2006 Ford Fusion? I realize there is a different model specific to the 2006. But it looks like this hitch would work for the 2006 as well. I would like to be able to move it back and forth between my vehicles.
asked by: John
Expert Reply:
The Draw-Tite Class I hitch you referred to, part # 24865 is a fit for the 2010-2012 Ford Fusion, 2010-2011 Mercury Milan and the 2010-2012 Lincoln MKZ only. It won't fit your 2006 Fusion.
For the 2006, you'd want the Curt # C11329. If you look at both hitches, as well as their installation procedure, you can see that the two hitches are quite different. I've linked you to install instructions and videos for both hitches.
Even if the same hitch fit both vehicles, the hitch hardware is good for a one-time use only. Trailer hitches aren't meant to be repeatedly installed and removed.
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose a Hitch-Mounted Bike Rack
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Necessity of Routing Power Wire for T-One Wiring Harness # 118422 When Installed on 2010 Ford Fusion
- Q&A: 2010 Ford Fusion Hybrid Trailer Hitch Recommendation for Hitch Bike Rack
- Q&A: Does 4-Way Mounting Bracket BK4F Work with Curt 4-Way Harness C55411
- Q&A: Is There A Class II Trailer Hitch Available For A 2010 Ford Fusion
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Q&A: Will the Kuat Sherpa Bike Rack SH12P Fit a 2011 Ford Fusion
- Q&A: Can the Draw-Tite Trailer Hitch # 24897 be Used on a 2013 Ford Fusion Hybrid
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Hitch Installation Tips
- Q&A: Routing the Power Wire for a Trailer Wiring Harness for a 2014 Ford Fusion
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Trailer Hitch Receiver Sizes