Will Optronics Replacement Amber Lens Fit Glo-Brite 118A Amber Trailer Light

Question

Question:

Regarding the answer: I need an Amber Trailer Light To Replace Glo-Brite 118A Trailer Light Question: Do you have a clearance light replacement lens that would work for a Glo-Brite 118A/117R lens Amber thanks. The answer described a similar light, but didnt specify if that lights lens would work on the old 118a light. Will it? Thanks.

asked by: Murray M

0

Expert Reply:

I spoke with my contact at Optronics to see if the lens for their Rectangular LED Trailer Clearance, Side Marker Light with Reflector # MCL44AB will work for the Glo-Brite 118A amber trailer light.

She confirmed that the # A44AB lens will work on the Glo-Brite 118A. The # A44AB lens installs by snapping on to the light housing, and the lens measures 4 inches wide x 1-1/2 inches tall.

expert reply by: Victoria B

0

Answer 1

The incandescent version of the #MCL44AB1 lamp you mentioned is part #MC44AB. The lamp measures 4 by 1-1/2 inches and mounts on 3 inch centers. The lamp is a two wire design, one wire for power, the other for ground. This differs a bit from the LED…

view full answer...

Answer 2

If you can provide me with a photo that lists the length, width, and height of the replacement lens you are looking for I would be able to offer a better recommendation for you but based off of the above information, we have part #A32AB which is an…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 4

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 7

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Will Optronics Replacement Amber Lens Fit Glo-Brite 118A Amber Trailer Light

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching