Camper Hold Down Recommendation for a 2003 Ford F-350

Question

Question:

I have a 03 F 350 long bed , will these work for my truck , manufacturer receiver hitch

asked by: Gus R

0

Expert Reply:

The Angled Hold-Downs for Truck Bed Campers # HSAB would work well on your 2003 Ford F-350 for securing your camper to the bed of the truck. The only Ford trucks that we have fit exclusions for with these are the 2004-2008 Ford F-150.

You will also want the part # TDHP.

expert reply by: Jameson C

0

Answer 1

For your 2002 Ford F-250 I recommend checking out the TorkLift Custom Frame-Mounted Camper Tie-Downs #TLF2007 for the front, and the TorkLift Custom Frame-Mounted Camper Tie-Downs #TLF3001 for the rear. These tie-downs are American made, custom fit…

view full answer...

Answer 2

Since you're going with occasional use of your Lance camper I recommend the following parts for a tie-down system on your 2011 Chevy Silverado 2500: - Brophy Clamp On Camper Tie-Downs #HSAB - Brophy Basic Turnbuckles w/ Hardware for Camper…

view full answer...

Answer 3

I do have a way that will allow you to determine if the Brophy Clamp On Camper Tie-Downs part #HSAB will work for you but I spoke to my contact at Brophy and they do not list a weight capacity for them. As long as you are within the payload rating of…

view full answer...

Answer 4

From what you're saying it sounds like the Brophy Clamp On Camper Tie-Downs #HSAB will work on your 2021 Chevy Silverado 2500 but I'm adding a dimensional photo for you to reference and check with on your end. These are a universal…

view full answer...

Answer 5

Yes, the #HSAB is angled at the ends making it easier to attach the turnbuckles and keeping the tie-downs further from the truck's fenders. The #HSSF will work just as well but isn't quite as easy to connect.

view full answer...

Answer 6

While there isn't a specific weight capacity for the Brophy Clamp On Camper Tie-Downs #HSAB there is a 3,000lb capacity for the turnbuckles #TDHP that go along with these tie-downs. To ensure fitment of these tie-downs your truck will need to…

view full answer...

Answer 7

Yes, the Brophy camper tie-downs will work with your 2016 Ford F-250 as well as your Lance camper. You will need both the tie-downs as well as the turnbuckles: - Brophy Clamp On Camper Tie-Downs #HSAB - Brophy Basic Turnbuckles w/ Hardware for Camper…

view full answer...

Answer 8

The Brophy Clamp On Camper Tie-Downs #HSAB are a universal fit camper tie-down. They can work with DRW trucks, which is why it showed up in the fitguide as an option for your 2018 Chevy Silverado 3500, but you will want to take some measurements…

view full answer...

Answer 9

The overall length of your 2019 Arctic Fox 990 is 17-1/2 feet which the best option for a cover is the part #CAM45770 that you mentioned. It fits this size perfectly and is a heavy duty cover made of polypropylene that will do a great job protecting…

view full answer...

Answer 10

It is very likely the Brophy Clamp On Camper Tie-Downs - Bed Mount #HSAB will fit your 1999 Dodge Ram 2500 with an 8 foot bed, but because this is a universal fit, there isn't any specific fit information for your truck, though I can help you…

view full answer...

Answer 11

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Camper Hold Down Recommendation for a 2003 Ford F-350

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching