Parts Needed to Flat Tow a 2005 Honda Accord Non Hybrid
Question:
do you make a 4 wheel down tow bracket for 2005 v6 automatic honda accord 4dr non hybrid
asked by: Rick P
Helpful Expert Reply:
We do offer a base plate kit that has been confirmed as a fit for your 2005 Honda Accord non hybrid. For that you would want the part # 1545-1.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For lighting you can use the bulb and socket kit, # RM-154, and not have to worry about cutting into taillight housing. You will also want the # BX88206 to connect this lighting solution to your tow vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Products Referenced in This Question
Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Blue Ox
more information >
Blue Ox 7-Wire to 6-Wire, Coiled Electrical Cord
- Accessories and Parts
- Tow Bar Wiring
- Adapters
- 7 Round - Blade to 6 Round
- Coiled Cord
- Blue Ox
more information >
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Way Flat Connectors
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Standard
- Roadmaster
more information >
RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs
- Safety Cables
- Coiled Cables
- 68 Inch Long
- 6000 lbs GTW
- Snap Hooks
- Coated Cables
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Hitch Pin Attachment
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Does Steering have to be Locked out to Flat Tow a Vehicle Behind a Motor Home
- Q&A: Parts Needed to Tow a 2001 Honda Accord 4 Down Behind a Class C Motorhome
- Q&A: Base Plates and Other Needed Accessories to Flat Tow 2006 Honda Accord
- Q&A: 2001 Honda Accord EX V6 Base Plate Compatibility
- Article: Roadmaster Vehicle Specific Base Plates
- Q&A: Parts Needed to Flat Tow a 2006 Honda Accord Behind a Motor Home
- Q&A: Flat Towing Setup Recommendation for a 2000 Honda Accord
- Q&A: How to Install Curt Universal Adjustable Tow Bar on 2017 Chevy Spark
- Article: Must-Have Flat Towing Components
- Article: RV-Mounted vs Vehicle-Mounted Tow Bars
- Article: Stability Control for Heavy Duty Vehicles
- Article: What Is a Supplemental Braking System?
- Article: We Used 34 RV Tow Bars, and These are the Best for Flat Towing
- Article: Tow Bar Wiring Overview