Motorcycle Wheel Chock for Metal Floor Trailer
Question:
Do any of your trailer motorcycle chocks secure to a trailer that has a metal floor? The trailer is an Echo E 14-14. Bike is a 2007 Harley Davidson Heritage Softail Classic.
asked by: Su W
Helpful Expert Reply:
The Tow-Rax Removable Wheel Chock # TWSPWC3BT can be installed on metal surfaces using the included hardware kit. You will need a drill with a 9/16-inch bit for metal floors as well as a 3/16-inch bit. You will also need 5/16-inch and 3/16-inch Allen keys and a Philips screwdriver.
We do not happen to have an installation video for this item but I have included a photo of the mounting hardware with dimensions added to help you determine the fit for your application.
Basically you drill the 9/16 inch hole where you are wanting to attach the wheel chock, put the round insert into the hole with the raised portion facing down into the drilled hole and then using the three round holes as a template drill holes to insert the thinner bolts into and secure them with the bolts below. The thicker bolts will then screw into the large center hole of the plate to hold your wheel chocks.
Products Referenced in This Question
Tow-Rax Removable Wheel Chock w/ Hardware - 6-1/2" Wide Tires - Tubular Steel - Chrome
- Wheel Chocks
- Wheel Chock
- Motorcycle
- Steel
- Single Chock
- Chrome
- Tow-Rax
more information >
Product Page this Question was Asked From
Tow-Rax Removable Wheel Chock w/ Wood Screws - 6-1/2" Wide Tires - Tubular Steel - Black
- Wheel Chocks
- Wheel Chock
- Motorcycle
- Steel
- Single Chock
- Black
- Tow-Rax
more information >
Continue Researching
- Article: How to Install E-Track in 3 Easy Steps
- Video: ShockStrap Ratchet Tie-Down Straps with Shock Absorbers Review
- Video: Rackem Spare Tire Rack Review
- Video: ShockStrap Tie Down Straps - Trailer - 297-7RSBB-M Review
- Shop: Brake Controller
- Q&A: Slot Dimensions of the E-Track
- Q&A: How to Pick the Height for Installing E-Track on a Trailer Wall
- Shop: CargoSmart Motorcycle Wheel Chock for E Track or X Track Systems - 7" Wide Tires
- Shop: Tow-Rax Removable Wheel Chock w/ Hardware - 6-1/2" Wide Tires - Tubular Steel - Chrome
- Shop: Brophy D-Ring Tie Down Anchor - Bolt On - 1/2" Diameter - 2,000 lbs
- Shop: ShockStrap Ratchet Motorcycle Tie-Downs w Shock Absorbers - 1-1/2" x 7' - 1,000 lbs - Qty 4
- Shop: etrailer E-Track Backing Plates w Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 16
- Shop: CargoSmart Recessed D-Ring Tie-Down Anchor - Bolt On - 3/8" x 2-1/8" - 1,667 lbs
- Shop: Brophy D-Ring Tie Down Anchor - Bolt-On - 4-7/8" Wide - Recessed Mount - 1,600 lbs
- Video: Erickson Spare Tire Carrier - Frame Mount - EM77316 Review
- Q&A: Gauge of Steel for E-Track Cargo Management Rails
- Video: etrailer Horizontal E-Track Review
- Shop: Trailer Wiring
- Search Results: motorcycle wheel chocks
- Q&A: Proper Front to Back Placement of Motorcycle Inside Enclosed Trailer
- Q&A: Weight Distribution System for Towing a 20 Foot Enclosed Car Hauler With Different Loads
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Video: Choosing the Right Brake Controller
- Search Results: 68149
- Article: Trailer Wiring Diagrams
- Q&A: Brake Controller Wiring for Ford E-450 Motorhome