Is Adapter Used to Install Tekonsha Prodigy P3 Trailer Brake Controller # 90195 on 2013 GMC Sierra
Question:
I have the Tekonsha Prodigy P3 Trailer Brake Controller and im looking for the Plug-in, vehicle-specific brake-control adapter for a 2013 gmc sierra crew cab 4x4 5.3L and help is greatly appreciated
asked by: Kelly H
Expert Reply:
A 2013 GMC Sierra 1500 is going to have all of the wires up under the dash needed to install the Tekonsha Prodigy P3 Trailer Brake Controller, # 90195, but no port/plug is present. So in this case a vehicle specific adapter is not available. You will just need to wire the quick disconnect harness that came with the brake controller directly to the Sierra's wiring.
RED vehicle wire connects to BLACK controller wire for power.
DARK BLUE vehicle wire connects to BLUE controller wire for brake output circuit.
LIGHT BLUE vehicle wire connects to RED controller wire for the stoplight signal.
WHITE wires connect together for the ground.
If this is a second vehicle and you need an extra harness you can use part # 20127.
I have attached a video of the P3 being installed on a 2011 Sierra for you.
Products Referenced in This Question
Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Universal
- Draw-Tite
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Choose the Right Trailer Hitch Class
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Why Is 5th Wheel Trailer Clunking When Starting/Stopping with B&W Companion and MORryde Pin Box
- Q&A: Troubleshooting A Clunking Noise Between A Fifth Wheel Hitch And Base Rails While Towing
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers
- Q&A: How Do I Measure the Drop Distance on a Trailer Drop Axle?
- Q&A: 10k Dexter Replacement Hub for a 8-415