Will a Pintle Hitch Fit Weld-On Nose Plate 337TNP716625750

Question

Question:

Does this part have the same bolt pattern as C48210 Pintle Hook?

asked by: Jud

0

Expert Reply:

Plate # 337TNP716625750 is going to be larger than what pintle hook # C48210 requires. The pintle hook is usually on the vehicle side so the mounts for it all have regular shanks that fit a hitch receiver. You want something like part # 63057.

The nose plate would be used on the trailer side to attach a lunette ring such as # C48550. The bolt holes are 4-1/2 inches apart.

expert reply by: Michael H

0

Answer 1

Often military trailers use a pintle or clevis type hitch. The link provided at right will take you to our main page for ball mounts where you can see both types. You can submit a photo to us to show your military trailer's hitch by responding to…

view full answer...

Answer 2

If you have a 2 inch receiver opening on the vehicle you will be towing with the B&W Pintle Hook Mounting Plate, part #BWPMHD14005 may work well for you. The mounting plate features 7 holes on each side of the plate that are spaced 1-3/4 inches…

view full answer...

Answer 3

There's no reason you couldn't use the B&W Pintle Hook Mounting Plate #BWPMHD14005 in both the rise and drop configuration. For a pintle hook to go along with it you might also be interested in the Pintle Hook part #C48210.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

The 8-14.5 tires are an older metric size no longer used today. Therefore, you would need to replace these along with the wheels in order to update them. In order to see if we have any options for you, we'd first need to determine the bolt…

view full answer...

Answer 12

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...