Increasing Ground Clearance on Trailer with Drop Spindles
Question:
Hey I have a 2007 jayco 1206 pop up. The trailer is great but I need more ground clearance. I have already ripped off a stabilzar and have come close other times. It is already a spring over axle set up. So I cant do an axle flip. It appears to have a drop axle though. Could I replace it with a straight axle? What other options do I have? Here is a picture. Thanks
asked by: Jarrett T
Expert Reply:
Since you have a drop axle, you could change it over to a straight spindle axle in order to gain 4 more inches of ground clearance. In order to get a new axle, some measurements of your current axle are needed. You will want to measure hub face to hub face, measure center of spring seat to center of spring seat, and find the axle capacity. The manufacturer name and part number are also helpful. Hopefully, the white sticker in the middle of your axle will have most of this information. If you do have to measure, I have attached a diagram showing the measurements needed.
If you want to get back to me with this information, I will be glad to see if we have a stock axle available to fit your trailer. If we do not, then you will want to check with a local axle dealer to order a custom axle for your trailer.
It is important to keep in mind that when changing from a drop axle to a straight spindle axle, the center of gravity for the trailer is raised. This increases the chances of trailer sway and roll.
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 3 Inch
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Video: Review of Hopkins Wiring - Wire Loom - 39035
- Shop: Suspension Enhancement
- Video: Timbren Axle-Less Trailer Suspension System Test Course
- Q&A: Coupler Repair Kit for 1987 Airstream with 2-5/16-Inch Trailer Coupler
- Q&A: How to Tell if a Trailer Spindle is Damaged or Needs to be Replaced
- Q&A: Does a Spindle with Scarring and Complete Bearing Failure Need to be Replaced
- Q&A: Best Way to Lift Tandem Axle Trailer Suspension 2 inches
- Search Results: led tail lights
- Search Results: wiring harness
- Search Results: wentzville mo
- Search Results: tail lights
- Article: How to Raise Your Travel Trailer Height
- Article: Slipper Spring Trailer Suspension System Review
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Shop: 2" Square Trailer U-Bolt (Qty 2)
- Shop: Replacement U-Bolt for 2" Wide, Square Axles - 1/2" Diameter - Zinc Plated
- Shop: Triangular Equalizer for 1-3/4" Double-Eye Springs - 6" Long - 9/16" Center Hole
- Shop: Timbren Silent Ride Suspension for Single Axle Trailers w/ 2" Square Axles - 2,000 lbs
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Search Results: trailer leaf spring suspension
- Q&A: Recommendation to Lift Trailer with Drop Axle
- Q&A: Can Leaf Springs be Moved to Top of Underslung Axle
- Search Results: axle flip kit
- Q&A: Will Switching From a Drop Axle to a Straight Axle Increase Tire Clearance
- Video: Lippert Center Point Trailair Air-Ride Suspension Upgrade Review
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: 2.5 round light
- Shop: Trailer Wiring
Justin F.
2/10/2020
It seems as though a lot of people convert and underslung axle to overslung to raise the trailer and gain more clearance. I however am looking to do the opposite. Is there a kit that will allow me to take an overlsung axle and make it underslung? I see the K71-385-00 Kit, will that work for me?