Will Higher Capacity Spring Bars Cause Stiffness and Bounce When Towing a 3,500 Pound Trailer
Question:
Is there any instructions about how to hook up an older reese dual cam sway bars? Not the new strait line, My trailer weighs about 3500# and that is the capacity for a travel trailer, 4500# for a boat with a 06 Honda Pilot. The hitch also has the trunnion bars and I get some bounce, could the bars be too stiff for my weight? Thanks for your help.
asked by: Richard S
Expert Reply:
I do have a link to the instructions for the older Reese Dual Cam sway control systems. I have included the link below. Properly adjusting the weight distribution and sway control can help to eliminate the bounce you are experiencing.
For your 3,500 pound trailer and a boat weighing 4,500 pounds, a weight distribution system with a tongue weight capacity range of 200 to 600 pounds would be just about ideal. If your bars are rated higher then this, you could experience a stiff ride.
Product Page this Question was Asked From
Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 12K GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Determining Trailer Tongue Weight
- Q&A: Recommended Weight Distribution System for a 6,800 lbs 2019 Lance 2465 Travel Trailer
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Installing a Brake Controller in 2014 Dodge Ram Pickup
- Q&A: Does The Curt True Course Allow The User To Adjust Its Sensitivity?
- Q&A: Can the Curt True Course Sway Controller Be Used With the New StabiliTrak Electronic Sway Control
- Q&A: Will Reese Weight Distribution System RP66131 Work for Trailer with 1,350 lbs Tongue Weight
- Q&A: 2-5/16 Inch Ball for Reese SC Weight Distribution System # RP66131
- Q&A: Trailer Hitch Ball Wrench Size and Torque Rating for 1-1/4 Inch Hitch Ball Shank Size
- Article: Ball Mount Basics: Weight Capacity, Class, and Size