Best Anti-Rattle Device Recommendation for a 2 inch Ball Mount

Question

Question:

What is the best anti rattle for my 1995 ford f150 hitch? when i slide the hitch into receiver it moves around and is noisy.

asked by: Dan

0

Expert Reply:

The most popular anti-rattle device we carry that is designed for use with a 2 inch hitch would be the part # 63232. This will install in the hollow shank of a 2 inch ball mount and will secure it to the side of your hitch so that it stop rattling. It also doubles as a hitch lock.

I attached an install video for you to check out as well.

expert reply by: Jameson C

0

Answer 1

The ball measures 2-3/4 inches from the ball mount surface to the top of the ball. I am glad to see that you are making sure you get the proper ball mount for your tow set up. The rule of thumb is to be no more than 2 inches over or under. The…

view full answer...

Answer 2

If you are referring to an anti-rattle device that actually tightens down over the accessory shank like the Roadmaster Quiet Hitch #RM-061, it's not going to be compatible with the etrailer Hitch Pin Alignment Collar #e98942. The collar will take…

view full answer...

Answer 3

The Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches #63232 can help with play, but for up-and-down movement, I think there's a better option, with a dedicated anti-rattle stabilizer: - Anti-Rattle Hitch Stabilizer for 2" Hitches…

view full answer...

Answer 4

The Curt Rebellion XC cushioned ball mount part #C83WR would cushion the ride quality and reduce the movement you are experiencing but an easier and most cost effective solution would be an anti-rattle device like the etrailer #e99007 which will lock…

view full answer...

Answer 5

The Anti-Rattle Device and Lock, #63232, is made of chrome plated steel. It does not have an official capacity because it has a higher breaking point than a hitch or ball mount that would be used with it. I have included a link to a video showing how…

view full answer...

Answer 6

The patented Lets Go Aero Anti-Rattle Device for 2-Inch Hitches, part #63232, will work in most aftermarket Class II, III and IV 2-inch hitches. It will not fit some extra-wide factory-installed hitch receviers. Please note that it can only be used…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

I have a solution for you. You can't convert the Thule T2 Pro XTR 2 Bike Platform Rack #TH23JV to a 2 inch hitch according to my contact at Thule so you will need to use an adapter. I recommend using the Brophy Hitch Reducer 2" to…

view full answer...

Answer 9

Hey Thea, sorry to hear about the B and W Tow n Stow part #BWTS20066BMP not fitting super tight in your hitch. This generally isn't a quality issue though as it can be that the tolerances of the hitch it's installed in are too loose. You…

view full answer...

Answer 10

You can expect the installation of the #C59236 in the 2023 Palisade video to be almost identical to your 2022 Hyundai Tucson. I'm not sure if the tail light style varies so removal may be a little different but the rest will be the same.

view full answer...

Answer 11

Hey John, Hellwig is a bit new to our selection so I haven't gotten to get my hands on as many of their products as compared to Roadmaster. The experience I've had so far has been somewhat disappointing in terms of overall quality…

view full answer...

Answer 12

The B&W Silencer Pad #BWTS35020 is intended to be placed on the shank of one of their Tow & Stow Multi-Ball Mounts like #BWTS10048B so that it acts like a gasket between the collar on the end of the hitch's receiver tube and the…

view full answer...

Best Anti-Rattle Device Recommendation for a 2 inch Ball Mount

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching