Size of the Mounting Bolts Included with the Trailer Valet
Question:
I just need to know the specifications of the hex bolts used to mount the Trailer Valet bracket on the trailer tongue. i.e. Is it #10-32x3.5 or 5/16-18x4 or some other dimension of stainless bolt? Thank you for your direct response,
asked by: Jay M
0
Expert Reply:
I went out to one of the trailers we have here at etrailer.com that has the Trailer Valet # STC-V211 installed on it and measured the bolts and they are 4-1/2 inches long and the diameter of the threaded portion of the bolt .39 inches.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Valet 5X Swivel Jack and Trailer Mover - Topwind - 15" Lift - 5,000 lbs
- Trailer Dolly
- Manual Dolly
- 5000 lbs Capacity
- 15 Inch Tall
- Steel
- Silver
- Trailer Valet
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Article: Best Boat Trailer Jacks
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Will Using 2 of the Timbren Axle-Less Trailer Suspension Kits Double the Capacity?
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Cost Effective Alternative to Trailer Valet XL Trailer Dolly with Chain Drive
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Dolly Recommendation for Trailer to Manually Move Trailer Around Driveway
- Q&A: Difference Between Trailer Valet Trailer Dolly 5X and XL Versions
- Q&A: Can Bed Rug be Used with 5th Wheel Hitch
- Q&A: Recommendation for Back-Up Camera for 5th Wheel RV
- Q&A: Recommended Wireless Backup Camera System That Connects to Smartphone